Hatco PMG-100 Powermite® Gas Booster Water Heater, 4 3/4 Gal, 105,000 BTU, Liquid Propane

The Hatco PMG-100 Powermite® gas booster water heater has three tube-type burners to provide sanitizing water at 180 degrees Fahrenheit. Designed to fit beneath a dishtable, this unit can be close when needed. The front, top, and tanks are made of durable stainless steel, and the sides and back are powder coated to resist scratches. The standing pilot must be sparked to light for operation.

Operated by an efficient fin-tubed heat exchanger, the Hatco PMG-100 gas booster water heater can be checked using two temperature gauges. The water is treated with blended phosphate to fight limestone buildup. For safe operation, this unit cuts off when water gets too low. The shock absorber eliminates potential knocking noises, keeping this booster quiet. As a safety measure, a temperature-relief valve and pressure-reducing valve are included.

Product Details

• 4.75-gal. capacity
• Supplies sanitizing water at 180 degrees F
• Designed to fit under a dishtable
• 2 pressure gauges
• Temperature-relief valve
• Pressure-reducing valve
• Uses primary and secondary air for consistent ignition
• 3 tube-type burners
• Turns off when the water level is too low to operate
• Stainless steel tanks, top, and front
• Powder-coated sides and back
• Standing pilot for light-to-start operation
• Shock absorber reduces noise
• Water treated with blended phosphate to eliminate limestone
• ³⁄₄-in. NPT pipe
• Fittings for water inlet and outlet
• Finned-tube, copper heat exchanger
• 105,000 BTU

Temperature Rise Ratings

• 321 GPH at 30-degree-F rise
• 241 GPH at 40-degree-F rise
• 193 GPH at 50-degree-F rise
• 161 GPH at 60-degree-F rise
• 138 GPH at 70-degree-F rise

Dimensions & Utilities

• 31.65 in. W x 24.64 in. D x 31 in. H
• 3 A, 360 W
• 120 V/60 Hz/1 ph
• Heated by LP gas
• ³⁄₄-in. NPT gas connection

From The Manufacturer

Powermite® Booster Heater, gas, 4.75 gal storage capacity, blended phosphate water treatment system, low water cut-off, temp./pressure relief valve, pressure reducing valve, (2) temp./pressure gauges, indicator light & on/off switch, stainless steel tank & front, painted body & legs, 105,000 BTU, UL EPH Classified, CSA, Made in USA

*Image may not depict product color, inclusions or accessories.

Hatco PMG-100 Specifications

Spec Attribute	Spec Value
Manufacturer	Hatco
40F Recovery (gph)	241
70F Recovery (gph)	138
Amps	3
Total BTU	105000
Capacity (gallons)	4.75
Gas Type	LP
Heat	Gas
kW	24.8
Usage Level	Medium Duty
Voltage	120
Watts	360
Width (in)	27.5
Series	Powermite®
Product	Booster Heaters
Product Type	Dishwashing Equipment & Supplies
Weight	180.00