Hatco 3CS2-3B Booster Hydro-Heater, 3 kW, 240v/3ph
$2,247.30 /Each
Ship times may vary due to supply chain constraints. Please contact our Sales Team if you need this item in a specified time frame.
Hatco 3CS2-3B Description
The Hatco 3CS2-3B Hydro-Heater sanitizing sink heater generates rinse water between 180 and 190 degrees Fahrenheit using free-flow technology, moving water through its heated tubular system. Heating elements wrapped around the flow tube's exterior heat water efficiently without being submerged in water, reducing the risk of damaging sediment and lime buildup. Once water is heated, it returns to the sink's holding vessel automatically due to natural convection. For efficient operation, a low-water cut-off system prevents heating when water levels drop unexpectedly. An electronic controller integrated on the unit's front maintains a temperature setpoint, eliminating the need for operators to adjust temperatures consistently.
Ideal for three- or four-compartment sinks, this Hatco 3CS2-3B sink heater measures 7.75 inches wide by 17.06 inches deep by 12.36 inches high and fits into a sink area as large as 15 inches wide by 15 inches deep. For efficiency, supply water must be 140 degrees Fahrenheit, and if it exceeds more than 3 grains of hardness per gallon, it must be treated and softened before use with this system. As debris builds up in its reservoir, it can be emptied through its drain outlet, which includes clean-out caps. Built to last in commercial settings, its stainless steel front resists rust and corrosion, while its black powder-coated body can be wiped clean when needed.
Product Details
- For use underneath a 3- or 4-compartment sink
- Can be installed into a 15-in.-wide x 15-in.-deep sink area (maximum)
- Produces and maintains rinse water temperatures between 180-190 degrees F
- Free-flow technology with natural convection
- Heating elements wrapped around flow tube's exterior
- Electronic controller with temperature setpoint
- Digital temperature display
- 30-minute preheat period
- Low-water cut-off system
- On/off switch
- Stainless steel front and black powder-coated body
- Drain outlet and clean-out caps
- Requires incoming water with a hardness less than 3 GPG
- Required supply water temperature: 140 degrees F
Dimensions & Utilities
- 7.75 in. W x 17.06 in. D x 12.36 in. H
- 7.3 A, 3 kW
- 240 V/50-60 Hz/3 ph (balanced)
Product Features
From The Manufacturer
Hydro-Heater Sanitizing Sink Heater, electric, undersink design, stainless steel front, powder coated body, low water cut-off, electronic temperature monitor, for 15" square sink area or less, 3.0 kW (balanced), cULus, UL EPH Classified, ANSI/NSF 4, Made in USA, 240v/60/3ph
*Image may not depict product color, inclusions or accessories.
Watch a video about this product
Hatco 3CS2-3B Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Hatco |
| Fits Sink Size | 15in square or less |
| Hertz | 60 |
| Special Features | Low Water Cut Off |
| Type | Undersink Install |
| Voltage | 240 |
| Warranty | 1-year Parts & Labor; 5-year Tank Parts |
| Series | Hydro-Heater |
| Phase | 3 |
| Product | Sanitizing Sink Heaters |
| Product Type | Commercial Sinks |
| Weight | 35.00 |
Important Prop 65 information for California residents.
