Compact Electric Booster Water Heaters - 30kW
The Hatco Compact Electric Booster Water Heater provides all the 180 degree F (82 degree C) final rinse water required to sanitize and flash-dry dishes and flatware.
- Castone lined tank with a 10-year limited warranty.
- Features include a temperature/pressure relief valve and gauges, a high-temperature limit control, indicator light, on-off switch, and a low-water cut-off to prevent element burnout due to a low water condition.
- Available with slide brackets for mounting under a dish-table.
- Each Booster has fiberglass insulation to minimize heat loss.
- Hatco electric booster heaters are factory pre-plumbed and pre-wired with calibrated immersion thermostat and high-temperature limit switch.
- A stainless steel front panel and powder-coated silver-gray hammer-tone body is standard on all Compact models.
- Swing-away front panels with low-water cut-off, control fuses and transformer allow quick access to probes and elements for easier serviceability.
Same Day Shipping on orders received before noon (based on availability).
Consult the product specification sheet for options or other voltages that may be available at additional cost.
To obtain pricing for optional accessories and/or voltages, please use the feedback form below, contact customer service at 800-541-8683, or use our .
Compact Booster Heater, electric, 6-gallon storage capacity, electric operation, 30-KW, stainless steel front panel, powder-coated silver-gray hammertone body, Castone tank, NSF, cUL, UL, 240v/60/1ph
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Hatco C-30 SpecificationsPDF Spec Sheet
|40F Recovery||301 gph|
|70F Recovery||172 gph|
|Width (in) Range||16 - 20 in|