Advance Tabco KSS-367 84" 14 ga Work Table w/ Undershelf & 304 Series Stainless Top, 5" Backsplash

Constructed of 14-gauge, 304-series stainless steel, the Advance Tabco KSS-367 work table features a sound-deadened top that resists warping during repetitive food prep. The top surface has a satin polish and is reinforced underneath by three roll-formed, embossed galvanized hat channels secured with structural adhesive and weld studs. Along the front edge, a 1 5⁄8-inch sanitary rolled rim creates a comfortable contact point, while the rear includes a 5-inch backsplash with a 1-inch return to contain spills and splashes against the wall. Square side edges measuring 1 5⁄8 inches enhance alignment with adjacent units.

Built to support additional storage, the Advance Tabco KSS-367 work table includes an undershelf made of 18-gauge stainless steel. This shelf adjusts vertically along the 1 5⁄8-inch-diameter tubular stainless steel legs, using die-cast aluminum clamps that secure it in place without exposed fasteners. Stainless steel gussets are TIG welded to reinforce each leg joint, and pre-engineered welded angle adapters enable future drawer installation. For stability on uneven surfaces, each leg is fitted with a 1-inch adjustable stainless steel bullet foot.

Product Details

• From the KSS series
• Open base
• Top made of 14-ga. 304-series stainless steel
• Entire top has satin finish and sound-deadened construction
• Top includes 3 hat channels
• Fastened with galvanized hat channels and structural adhesive
• 5-in. backsplash with 1-in. return
• Front has 1 5⁄8-in. sanitary rolled rim
• Sides are 1 5⁄8-in. square
• Legs made of 1 5⁄8-in.-diameter stainless tubing
• Stainless steel gussets
• Welded angle adapters for drawer installation
• Adjustable undershelf made of 18-ga. stainless steel
• Aluminum die-cast shelf clamps
• 1-in. adjustable stainless bullet feet
• Overall dimensions: 84 in. L x 36 in. W x 35 1⁄2 in. H