Advance Tabco KSS-366 72" 14 ga Work Table w/ Undershelf & 304 Series Stainless Top, 5" Backsplash

Made with a 14-gauge, 304-series stainless steel top, the Advance Tabco KSS-366 work table supports prep tasks in commercial kitchens while resisting wear from routine use. To strengthen the surface, three roll-formed, galvanized hat channels are attached to the underside using structural adhesive and weld studs. A 5-inch backsplash with a 1-inch return is integrated along the rear edge to help block liquids and utensils from slipping behind the unit. Its satin-polished surface includes a 1 5⁄8-inch sanitary rolled rim in front and 1 5⁄8-inch square edges on each side.

Equipped with an 18-gauge stainless steel undershelf, the Advance Tabco KSS-366 work table provides additional storage beneath the work surface. The shelf is height adjustable and secured to the legs with aluminum die-cast clamps that avoid visible hardware. The TIG-welded stainless steel legs measure 1 5⁄8 inches in diameter and are reinforced by stainless gussets at each junction. For installation of drawer accessories, pre-engineered angle adapters are welded to the frame, and each leg terminates in a 1-inch adjustable stainless steel bullet foot for leveling the table.

Product Details

• KSS series
• Open base
• Top made of 14-ga. 304-series stainless steel
• Entire top has satin finish and sound-deadened construction
• Top includes 3 hat channels
• Fastened with galvanized hat channels and structural adhesive
• 5-in. backsplash with 1-in. return
• Front has 1 5⁄8-in. sanitary rolled rim
• Sides are 1 5⁄8-in. square
• Legs made of 1 5⁄8-in.-diameter stainless tubing
• Stainless steel gussets
• Welded angle adapters for drawer installation
• Adjustable undershelf made of 18-ga. stainless steel
• Aluminum die-cast clamps secure shelf to legs
• 1-in. adjustable stainless bullet feet
• Overall dimensions: 72 in. L x 36 in. W x 35 1⁄2 in. H