Advance Tabco KSS-3612 144" 14 ga Work Table w/ Undershelf & 304 Series Stainless Top, 5" Backsplash

The Advance Tabco KSS-3612 work table is built with an extra-long 144-inch work surface made of 14-gauge, 304-series stainless steel. To prevent deflection across the length, three roll-formed galvanized hat channels are bonded to the underside with weld studs and structural adhesive. A 5-inch backsplash with a 1-inch return helps contain splashes and loose items, while the front has a 1 5⁄8-inch sanitary rolled rim to improve operator comfort. The square 1 5⁄8-inch sides allow this table to sit flush with adjacent surfaces or equipment.

Supporting the table from below, the Advance Tabco KSS-3612 work table includes an 18-gauge stainless steel undershelf that adjusts in height to accommodate varied storage needs. Aluminum die-cast clamps fasten the shelf to 1 5⁄8-inch-diameter stainless steel legs without using exposed bolts. Gussets welded at each leg junction add support to the TIG-welded frame, and pre-installed angle adapters simplify the addition of drawers if needed. The table balances on 1-inch adjustable stainless steel bullet feet for use on uneven flooring.

Product Details

• KSS series
• Open base
• Top made of 14-ga. 304-series stainless steel
• Entire top has satin finish and sound-deadened construction
• Top includes 3 hat channels
• Fastened with galvanized hat channels and structural adhesive
• 5-in. backsplash with 1-in. return
• Front has 1 5⁄8-in. sanitary rolled rim
• Sides are 1 5⁄8-in. square
• Legs made of 1 5⁄8-in.-diameter stainless tubing
• Stainless steel gussets
• Welded angle adapters for drawer installation
• Adjustable undershelf made of 18-ga. stainless steel
• Aluminum die-cast clamps secure shelf to legs
• 1-in. adjustable stainless bullet feet
• Overall dimensions: 144 in. L x 36 in. W x 35 1⁄2 in. H