Southbend HDG-60 NG 60" Gas Griddle - Thermostatic, 1" Steel Plate, NG

KaTom #: 348-HDG60NG • MPN: HDG-60 NG

Extended Lead Time (14+ days)

(0 reviews)Write a Review
Retail Price: $10,052.00
$5,528.60 / Each

Southbend HDG-60 NG Description

Southbend's HDG-60 NG 60-inch commercial countertop natural gas griddle is an ideal tool to dish out grilled delicacies by the dozens. Operating at a total of 150,000 BTUs per hour, this model has a stainless steel front, vent and sides, while the rear and bottom panels are made from aluminized steel. It also includes a fully-welded griddle plate with a protected exhaust vent to prevent excess grease and heat from floating around in your kitchen. The counterline model also has "insta-on" thermostatic controls for accurate settings between 200 and 400 degrees.

Product Details:

  • Operates at a total of 150,000 BTUs per hour
  • Standard stainless steel front, vent and sides
  • Aluminized steel rear and bottom panels
  • Fully-welded griddle plate with a protected exhaust vent helps prevent excess heat
  • "No Cold" zone uniform heat distribution across the surface for even cooking consistency
  • Battery-powered electronic spark ignition to quickly ignite burners
  • Reinforced, insulated double wall sides keep heat inside
  • 1-in. thick polished rolled steel plate holds products to griddle
  • 5-in. high rear and 4-in. side splash guards protect users from sputtering liquid and loose particles
  • 3/4-in. rear gas connection and pressure regulator
  • Includes large capacity grease drawers to trap loose liquid and food debris
  • Imbedded load sensing thermostat
  • 4-in. adjustable stainless steel legs for steadiness
  • Includes flame failure safety device
  • Overall Dimensions: 60-in. W x 33-3/4 in. D x 16-1/3 in. H
  • CSA-Design, CSA-Gas, cSAus Listed, NSF Certified

Griddle, countertop, NG gas, 60" W x 24" D cooking surface, 1" thick polished steel plate, thermostatic controls, battery spark ignition, stainless steel front, sides & 4" adjustable legs, 150,000 BTU, CSA, NSF

*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.

Southbend HDG-60 NG Specifications

PDF Spec Sheet
Manufacturer Southbend
Control Thermostatic
Plate Material Steel
Heat Gas
Gas Type NG
BTU / Burner 30000
Overall Width (in) 60
Cooking Area Depth (in) 24
Plate Thickness (in) 1
Control Spacing (in) 12
Specialty Options Front Grease Trough
Warranty 1 year limited warranty
Overall Depth (in) 33.75
Weight 705.00
Southbend HDG-60 NG Certifications
  • NSF