Southbend HDG-24 24" Gas Griddle w/ Thermostatic Controls - 1" Steel Plate, Liquid Propane
$5,187.00 /Each
Call for details!
Selected Gas Type: Liquid Propane
Southbend HDG-24 Description
To resist dents, stains, and scratches, the Southbend HDG-24 griddle is constructed of stainless and aluminized steel. Because its griddle plate is 1-inch thick, the cooking surface does not warp under constant heating, and every 12 inches, there is a U-shaped burner that is controlled by instant-on thermostatic controls. Temperatures can be set anywhere from 200 to 400 degrees Fahrenheit, and to ensure food cooks evenly, heat is distributed across the plate and is retained with insulated sides.
Grease and food particles are contained to the plate surface with 5-inch-tall rear splashes and 4-inch-tall side splashes, and cleaning is streamlined because liquids are collected in a grease drawer. To prevent overheating, the 4-inch-tall legs lift the unit off the countertop, and this Southbend HDG-24 griddle is heated by LP gas.
- Front, sides, and vent are constructed of stainless steel for strength
- Rear and bottom panels are aluminized steel for durability
- Sides are reinforced and double insulated to keep heat on the plate
- 1-in.-thick griddle plate resists warping
- Burners are spaced every 12 in.
- Heat is evenly distributed across the plate to ensure food cooks evenly
- Instant-on thermostatic controls use numerals to show low and high heat settings
- Temperature cooking range: 200-400 degrees F
- Embedded, load-sensing thermostat
- Runner tube on each burner
- 5-in.-tall rear and 4-in.-tall side splashes prevent grease and particles from getting on other surfaces
- Grease drawer collects liquids and debris for efficient cleanup
- 4-in. legs lift the unit off the countertop
- Electronic spark ignition
- 3⁄4-in. rear gas connection and pressure regulator
- Flue opening is protected from damage
- Protected exhaust vent
- Flame failure safety device
- Requires 12-in. clearance on sides and 8-in. clearance on rear from combustible construction
- Must be installed under a vent hood
- 60,000 BTU
- 24 in. W x 31.75 in. D x 20 in. H
- Heated by LP gas
*Image may not depict product color, inclusions or accessories.
*Free shipping on Southbend HDG-24 within the 48 contiguous states.
From The Manufacturer
Griddle, countertop, gas, 24" W x 24" D cooking surface, 1" thick polished steel plate, thermostatic controls, battery spark ignition, flame failure safety device, stainless steel front, sides & 4" adjustable legs, 60,000 BTU, CSA, NSF
Southbend HDG-24 Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Southbend |
| Application | Medium Duty |
| BTU / Burner | 30,000 |
| Control Spacing (in) | 12 |
| Controls | Thermostatic |
| Cooking Area Depth (in) | 24 |
| Cooking Area Width (in) | 24 |
| Gas Type | LP |
| Heat | Gas |
| Overall Width (in) | 24 |
| Plate Material | Steel |
| Plate Thickness (in) | 1 |
| Product | Griddles |
| Product Type | Countertop Cooking Equipment |
| Rating | Better |
| Warranty | 1-year Limited Parts & Labor |
| Width (in) | 24 |
| Weight | 305.00 |
Important Prop 65 information for California residents.
- 5
- 4
- 3
- 2
- 1
Review this product!
