T&S B2187 37 5/8"H Wall Mount Pre Rinse Faucet - 1 3/20 GPM, Base with Nozzle

The T&S Brass B-2187 pre-rinse unit is wall-mounted and includes a swing nozzle faucet and a spray valve. The swing nozzle faucet body and riser are made of polished chrome-plated brass, and the 14-inch swing nozzle has a Series 1 stream regulator. Lever handles are used and are color-coded red for hot and blue for cold.

The spray valve on the B-2187 pre-rinse unit has a flow rate of 1.42 GPM, which allows water at a temperature of 105 degrees to flow in about 30 seconds, and uses an Eterna compression cartridge that helps prevent cross-flow. The valve is operated with a heat-resistant handle and lever, and a hold-down ring helps reduce user fatigue when used for extended periods. The 44-inch rubber hose helps ensure the user will be able to maneuver the spray valve as needed, and a finger hook keeps it out of the way when not in use.

Product Details

• Wall-mounted pre-rinse unit with spray valve and 14-in. swing nozzle
• Body, riser, and spray valve are made out of polished chrome brass
• Swing nozzle faucet has a Series 1 stream regulator
• 18-in. riser
• Spray valve with flow rate of 1.42 GPM allows heated water to flow quickly
• Flexible PVC rubber hose is 44-in. long
• Heat-resistant gray handle and hold-down ring make using the spray valve simple
• Eterna compression cartridges with spring checks prevent cross-flow
• Lever handles are color-coded for hot and cold water
• Centers are adjustable from 7 3⁄4-in. to 8 1⁄4-in.
• Finger hook helps keep spray valve out of the way when not in use
• 2-in. flanges and 1⁄2-in. NPT female inlets for easy installation
• Low lead content
• EPAct compliant
• Overall Dimensions: 12 7⁄16 in. W x 14 1⁄8 in. D x 37 5⁄8 in. H (D is measured from the middle of the spray valve to the middle of the riser)