Make sure that you won't run out of hot water with this compact booster heater. The compact water heater has a storage capacity of 3.2 gallons and has a stainless steel tank designed for fast recovery. Providing 180 F hot water this water heater is great for hot water sanitizing or point-of-use water dispensing. A pressure reducing valve and a low-water cut-off prevents element burnout caused by low-water conditions while fiberglass insulation minimizes heat loss. With a Stainless steel front that is powder-coated with a silver-gray hammer-tone body, black base, and sturdy 6" legs, this compact booster heater was built to last.
- 3.2 gallon capacity
- Compact size
- Relief valves and gauges
- Fast recovery
- 9.9 kw
- 208/3 V
Water Heater, Electric, 3.2 gallon storage capacity, s/s tank and front, fast recovery, powder coated silver gray hammertone body, black base, 6'' legs, 9.9kw, 208/3. NOTE: Water supply in excess of 3.0 grains of hardness per gallon (GPG) must be treated and softened before being used; water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Please be advised that product failure caused by liming or sediment buildup is covered under warranty ONLY with proper usage of Hatco water treatment system.
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Hatco MC-10 208/3 SpecificationsPDF Spec Sheet
|40F Recovery||99 gph|
|70F Recovery||57 gph|
|Category||Water Booster Heaters|