The Kold-Draft GTX361LC ice maker can produce 358 pounds of full-cube ice, which is suited for alcoholic beverages since it melts slowly. It has a water-cooled condenser that does not generate as much heat and noise as an air-cooled condenser. A horizontal evaporator is placed upside down on the water plate, so each compartment is filled with water and frozen individually. This process creates pure, mineral-free ice since the cubes are frozen from the outside in. Because the Kold-Draft GTX361LC ice machine head is constructed of 300 series stainless steel, it resists corrosion, dents, and stains. To support efficient operation, this unit can be stacked with a bin and dispenser, both of which are sold separately from the maker. Its rounded corners clean up quickly and prevent staff injuries, and its plastic top panels and louvers can be removed for cleaning.
- 358-lb. daily ice production with 70-degree F ambient air and 50-degree F incoming water
- 304-lb. daily ice production with 90-degree F ambient air and 70-degree F incoming water
- Liquid-cooled condenser
- Full-cube ice size: 1.25 in. x 1.25 in. x 1.25 in.
- Uses R404A refrigerant
- Constructed of bend-resistant 300 series stainless steel
- Horizontal evaporator helps reduce the risk of freezing minerals into water
- Rounded corners support cleaning
- Removable top and louvers are made of plastic
- LCD display
- Can be stacked with KDB230 or KDB400 bins (sold separately)
- Needs 8-in. right and back, 6-in. top, and 4-in. left clearance
- Incoming water pressure: 20-100 PSIG
- Incoming water temperature: 45-90 degrees F
- Ambient air temperature: 45-110 degrees F
- 4,700 average BTU; 5,850 peak BTU
- cETLus listed component
- Made in the U.S.
- 3⁄4-in. FPT potable water inlet
- 3⁄4-in. FPT bin drain
- 3⁄4-in. I.D. flex tubing cuber drain
- 3⁄8-in. FPT condenser inlet
- 1⁄2-in. FPT condenser outlet
Dimensions and Utilities
- 30.1 in. W x 25.7 in. D x 16.9 in. H
- 11.1 A, 5.2 kW
- 115 V/60 Hz/1 ph
Check out our ice makers buying guide to find out if these units are right for you.
Ice Maker, cube-style, water-cooled self-contained condenser, production capacity up to 358 lbs/24 hours at 70°/50° (304 lbs at 90°/70°), LED display, stainless steel frame, plastic top, plastic louvers, full-dice size ice, stackable, 115v/60/1-ph, 11.1 amps, cETLus, Made in USA
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Kold-Draft GTX361LC SpecificationsPDF Spec Sheet
|Ice Type||Full Cube|
|Warranty||3-yr parts & labor; 5-yr compressor & evaporator|
|Product Type||Ice Makers & Bins|
|Recommended Bins||KDB230, KDB400, HD201, HD204, HD207, HDX201, HDX204|
|Product||Ice Machine Head|
|24 Hr. Production (lbs)||358|
|Compressor Type||Water Cooled|
|Made in USA||Yes|
|Cold Water (in)||3/4|
|Indirect Waste Size (in)||3/4|
|Production Range (per day)||100-999 lb|
|Width (in) Range||30-39|