Hobart FD4/50-3 Garbage Disposer w/ Short Upper Housing - 1/2 HP, 120/208-240v/1ph
IN STOCK: Ships in 1 Business Day
Less Than 5 in Stock, Order Soon!
$1,610.70 /Each
Contact us for details!
Non Returnable Item
Hobart FD4/50-3 Description
To cut solid food waste down to drainable pieces, the Hobart FD4/50-3 garbage disposer is powered by a 1⁄2-horsepower, continuous-duty motor that features a manual-reset thermal overload inherent protector and permanently lubricated ball bearings for streamlined operation. While its 1 3⁄4-inch-tall stationary shredder ring includes four machine-ground, primary-action breaker bars and 42 secondary-action grinding teeth to chop thick contents, the 6 3⁄16-inch-diameter Ni-Resist flywheel is equipped with a breaker blade that expedites grinding while preventing foods from riding on its center. If contents get lodged in the flywheel, users can manually reverse the blade's direction with a correlating switch. This component's hardened stainless steel cutter blocks are replaceable and can be indexed for new cutting edges.
Operators can fasten the Hobart FD4/50-3 food waste disposer to a 7-inch I.D. throat-opening cone beneath a sink. Its vinyl isolating ring prevents metal-to-metal contact at the cone's mounting to minimize disruptive vibrations and noises during operation. This 7-inch-diameter by 21 5⁄8-inch-high unit's aluminum grind and discharge housings are durable enough to withstand high-volume use. For use with a 1 1⁄2-inch standard rain trap, it comes with a chrome-plated brass tailpiece.
- Short upper housing design
- Continuous-duty motor with manual-reset thermal overload inherent protection mechanism
- Upper and lower support ball bearings are permanently lubricated
- 1 3⁄4-in.-high stationary shredder ring
- 4 machine-ground primary-action breaker bars
- 42 secondary-action grinding teeth
- 6 3⁄16-in.-diameter Ni-Resist flywheel with breaker blade
- 2 hardened, replaceable stainless steel cutter blocks
- Heavy aluminum grind and discharge housings
- For use with 7-in. I.D. throat-opening cone
- Vinyl isolating ring to minimize vibration and noise
- Motor shaft seal
- Manual reverse switch for dual-directional grinding mechanism
- 7 in. dia. x 21 5⁄8 in. H
- 4.6/2.3 A, 1⁄2 HP
- 120/208-240 V/60 Hz/1 ph
- 1 1⁄2-in. standard drain trap
*Image may not depict product color, inclusions or accessories.
*Free shipping on Hobart FD4/50-3 within the 48 contiguous states.
From The Manufacturer
Garbage disposer, basic unit only, 1/2 HP motor, 21.63"H, 2.3 - 4.6 Amps, 120v/208-240v/60/1ph
Watch a video about this product
Hobart FD4/50-3 Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Hobart |
| Hertz | 60 |
| HP | 0.5 |
| Phase | 1 |
| Product | Garbage Disposals |
| Product Type | Commercial Sinks |
| Unit Type | Basic |
| Usage Level | Light Duty |
| Voltage | 120/208/480 |
| Warranty | 1-year Parts & Labor |
| Weight | 75.65 |
Important Prop 65 information for California residents.
- 5
- 4
- 3
- 2
- 1
Review this product!
Nice!
A very stout disposal unit! Quite expensive, but it is a commercial disposal, so it's hard to compare with the residential disposals.
We appreciate you taking the time to share your feedback. This unit is built for commercial use, which explains both its heavier-duty construction and higher price point compared to residential disposals.
