The John Boos 3B18244-2D18 three-compartment sink is for washing, rinsing, and sanitizing dishes. It has three 14-inch-deep bowls with die-stamped openings in the bottom for draining water. Drainboards on both the left and right of the unit provide a place for dirty dishes to sit or clean dishes to drain. Its backsplash is 10 inches tall and helps prevent liquids from getting on walls and other equipment. There are two holes in the backsplash for installing a faucet. The John Boos 3B18244-2D18 three-compartment sink is constructed of stainless steel, holding up against everyday use and resisting corrosion.
- 16-ga. stainless steel construction resists corrosion and everyday use
- 3-compartment design for washing, rinsing, and sanitizing dishes
- 31⁄2-in.-dia., die-stamped openings in the bowls provide ideal drainage
- (2) 18-in. drainboards on either side of the unit can be used for holding dirty or clean dishes
- 10-in. high backsplash keeps water and spills from falling onto walls
- 11⁄8-in. holes in the backsplash are where a faucet is installed (sold separately)
- Stainless steel legs add support and stability
- Corners are coved to simplify cleaning by eliminating crevices where food particles get trapped
- Exterior corners have a bull-nose design to eliminate sharp edges
- Exposed welds are polished for a smooth surface
- Satin finish exterior
- Bowl dimensions: 18 in. L x 24 in. W x 14 in. D
- Overall dimensions: 93 in. L x 291⁄2 in. W x 43 in. H
- CSA-Sanitation listed; NSF certified
Not sure what kind of sink unit you need? Take a look at our sink buyers' guide for a variety of options and accessories.
Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
John Boos 3B18244-2D18 SpecificationsPDF Spec Sheet
|Drainboard Location||Both Sides|
|Backsplash Height (in)||10"|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||300 Series|
|Specialty Options||All Stainless Construction|
|Overall Length (in)||93|
|Sink Length (in)||18|
|Sink Width (in)||24|
|Sink Depth (in)||14|