Advance Tabco MG-2412 144" 16 ga Work Table w/ Undershelf & 304 Series Stainless Flat Top

Made of 16-gauge 304 series stainless steel, the top of the Advance Tabco MG-2412 work table spans 144 inches wide by 24 inches deep to accommodate busy prep and staging tasks. The surface is polished to a satin finish for easy cleaning and includes a sound-deadening layer to reduce operational noise. Two galvanized hat channels, secured with adhesive and weld studs, are fastened beneath the top to maintain its level structure under weight. Rolled rims on the front and back measure 1 5⁄8 inches to minimize edge damage and trap less debris, while the square sides allow flush installation next to adjacent units.

For storage and organization, the Advance Tabco MG-2412 features an 18-gauge galvanized undershelf that adjusts vertically to meet varied workspace needs. It's mounted with aluminum die-cast clamps that fasten without exposed bolts, keeping the frame clean and snag free. The TIG-welded galvanized legs are supported by a rear tubular cross rail and gussets welded beneath the top. Each leg terminates in a 1-inch adjustable plastic bullet foot to ensure stability on uneven floors. For future add-ons, pre-welded angle adapters beneath the surface simplify drawer installation.

Product Details

• MG Series
• Work surface: 144 in. W x 24 in. D
• Undershelf-style open base
• Top made of 16-ga. 304 stainless steel
• Adjustable undershelf constructed of 18-ga. galvanized steel
• Satin-finished top
• Sound-deadening layer under top
• Includes 2 galvanized hat channels
• Hat channels affixed with adhesive and weld studs
• 1 5⁄8-in. rolled rims on front and back; square ends
• Square sides
• 1 5⁄8-in. galvanized tubular legs
• Rear support includes tubular cross rail
• No cross rails on sides
• Welded gussets reinforce top structure
• Angle adapters pre-welded for drawer installation
• 1-in. adjustable plastic bullet feet
• Overall dimensions: 144 in. W x 24 in. D x 35 1⁄2 in. H