The Advance Tabco FC-K6-18D three-compartment corner sink maximizes floor space. With three 18-inch-by-18-inch bowls, it is perfect for washing, rinsing, and sanitizing dishes. Coved corners in the bowls prevent food scraps from getting stuck. Two sets of faucet holes are punched into the backsplash, but faucets are sold separately. Each end has an 18-inch-by-18-inch drainboard, so dirty dishes can sit on one side and clean dishes on the other. Both the legs and 1-inch bullet feet are made of stainless steel, and the feet adjust to stabilize on most floors. The tile edge makes the unit easy to install.
- Corner style maximizes space in virtually any room
- 3 compartments are ideal for washing, rinsing, and sanitizing dishes
- Coved corners in the sink bowl do not trap food debris
- (3) 11⁄2-in., basket-type waste drains
- 2 sets of faucet holes on 8-in. centers (faucets not included)
- (2) 18-in. x 18-in. drainboards can be used for dirty and clean dishes
- Backsplash keeps water in the bowls and drainboards
- TIG welded to add structural strength
- Welded areas are blended to a satin finish to match adjacent surfaces
- Rolled rim edge provides additional durability
- Tile edge facilitates installation
- Stainless steel legs with 1-in. stainless steel bullet feet
- Bowl dimensions: 18 in. L x 18 in. W x 14 in. D
- Overall dimensions: 57 in. L x 57 in. W x 24 in. front to back x 43 in. H
- NSF certified
Unsure if a compartment sink is right for your application? Take a look at our sink buyers' guide to read about other options.
Fabricated NSF Corner Sink, 3-compartment L shaped, 18" right & left drainboards, bowl size 18" x 18" x 14" deep, 16 gauge 304 series stainless steel, tile edge splash, rolled edge, faucet holes on 8" centers, stainless steel legs, 1" adjustable stainless steel bullet feet, NSF, overall 24" F/B x 57" x 57" (requires 2 faucets)
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Advance Tabco FC-K6-18D SpecificationsPDF Spec Sheet