MoTak MBST-36 36" Forced Air Bottle Cooler - Holds (276) 12 oz Bottles, Lid Locks, 115v
IN STOCK: Ships in 1 Business Day
20+ in Stock
Retail Price: $2,760.00
$1,069.00 /Each
MoTak MBST-36 Description
By keeping bottles and cans chilled through forced-air refrigeration, the MoTak MBST-36-X bottle cooler helps increase customer satisfaction. Depending on how it's loaded, this 36-inch-wide by 28.13-inch-deep by 37.25-inch-high unit can hold (276)12-ounce bottles. With its two dividers, bartenders can separate bottles and cans for better organization and serviceability. A 33- to 38-degree-Fahrenheit temperature range keeps drinks cool, and the electronic control system enables users to input a temperature set point and defrost frequency for desired results.
Made of a black vinyl-covered steel, the MoTak MBST-36-X commercial bottle cooler's exterior doesn't corrode over time, so it's safe to use in humid environments. Its top is made of stainless steel that's durable enough to handle high-volume use. Factory-installed casters at the bottom of the unit increase its mobility, so it can be moved to the kitchen or the bar as needed. For general maintenance, the accessible condenser coil assists in cleaning and service. This unit uses R290 refrigerant, which is environmentally friendly. A removable bottle opener and cap catcher are built onto the unit for versatility.
Product Details
- Holds (276) 12-oz. bottles
- Temperature range: 33-38 degrees F
- Vinyl-covered black steel exterior resists corrosion
- Stainless steel top
- Aluminum interior
- 2 dividers
- 1 door
- Electronic control system for temperature set point and defrost frequency
- 3-in. swivel casters
- Accessible condenser coil
- Uses R290 refrigerant
- Built-in bottle opener and cap catcher
Product Features
Dimensions & Utilities
- 36 in. W x 28.13 in. D x 37.25 in. H
- 2.28 A, 1⁄6 HP
- 115 V/60 Hz/1 ph, 10-ft. cord with NEMA 5-15P plug
From The Manufacturer
Horizontal Bottle Cooler, one stainless steel sliding top door, 2 dividers, 11 case capacity (276) 12 oz bottles), electronic control system, removable bottle cap opener and cap catcher included, 3" swivel casters with brakes, easy to access condenser coil, R290 refrigerant, corrosion resistant vinyl on steel, black, 36"W x 28.13"D x 37.25"H, 1/6 HP, 2.28 amps, 115v/60/1ph
*Image may not depict product color, inclusions or accessories.
Cord Attached
This product includes a cord and plug
Natural Refrigerant
Product made with Hydrocarbon Refrigerants
Watch a video about this product
MoTak MBST-36 Specifications
Spec Attribute | Spec Value |
---|---|
Manufacturer | MoTak |
Access | Top |
Bottle Capacity | 276 |
Color | Black |
Depth (in) | 28.13 |
Door Type | Sliding |
Height (in) | 37.25 |
Hertz | 60 |
Number of Dividers | 2 |
Special Features | Door Locks |
Supports | Casters |
Temperature | 33°F to 38°F |
Type | Forced Air |
Voltage | 115 |
Warranty | 2-year Part & Labor; 5-year Compressor |
Width (in) | 36 |
Series | MBST Series |
Phase | 1 |
Rating | Good |
Product | Bottle Coolers |
Product Type | Commercial Refrigeration |
Includes | Bottle Opener |
Weight | 198.00 |
WARNING: Important Prop 65 information for California residents.
MoTak MBST-36 Accessories
Other Products From This Line
MoTak MBST-36 Comparable Products
-
"use in second kitchen in shop, freed up lots of room in the refrigerator"
-
"I use the cooler to cool beer and wine. The casters do not lock therefor the cooler moves, the lid is cheap and thin and does not have a good seal and squeaks when opening and closing it, the pre-set temp is 33 - 41 degrees but will not hold a steady temp for very long and cycles quite often to cool down. Besides these issues I guess I got what I paid for - a cheaper unit. It is a nice looking unit though."