Vollrath 3646410 11 qt Drop In Soup Warmer w/ Thermostatic Controls, 120v
$565.65 /Each
Selected Voltage: 120V, 1 Phase
| 120V, 1 Phase |
| 208-240V, 1 Phase |
Ship times may vary due to supply chain constraints. Please contact our Sales Team if you need this item in a specified time frame.
Non Returnable Item
Attention: Order by 07-01-2026 to save before the price increases!
Vollrath 3646410 Description
No hard wiring is required when installing the Vollrath 3646410 drop-in soup well because it connects to a 120-volt circuit, while its 720-watt heating elements offer low-cost, energy-efficient operation. This modular well can be top mounted into 12 1⁄4-inch-diameter cutout, and a flat flange with a gasket promises a firm fit against the countertop. With its double-wall construction and fiberglass insulation, the well retains heat to increase efficiency and keep product at safe holding temperatures.
The top, well, exterior housing, and mounted-in control panel of the Vollrath 3646410 drop-in soup well are made of stainless steel for durability. It measures 12 13⁄16 inches in diameter by 11 11⁄16 inches high, and its flat work surface simplifies cleaning. To further optimize cleaning processes, a standard drain is welded to the pan with a ball-type drain valve, and for uncomplicated installation, mounting brackets are included.
- Accommodates (1) 11-qt. inset
- Fits 12 1⁄4-dia. cutouts
- Well fits firmly against the countertop with an included 12 13⁄16-in. dia. flat flange and gasket
- Top, well, and exterior housing are made from stainless steel for durability
- Thermostatic controls
- Stainless steel control panel
- Stainless steel drain nipple is welded to the well’s interior for durability
- Ample water capacity for the moist heat operation
- Double-wall construction and fiberglass insulation uphold hot, safe temperatures
- Molded breaker gasket fits under drip edge
- Flat work surface for easy cleaning
- 3⁄4-in. stainless steel drain fitting welded to pan with ball valve shutoff
- 12 13⁄16 in. dia. x 11 11⁄16 in. H
- 720 W, 6 A
- 120 V/60 Hz/1 ph, 6-ft. cord with a NEMA 5-15P plug
*Image may not depict product color, inclusions or accessories.
*Free shipping on Vollrath 3646410 within the 48 contiguous states.
From The Manufacturer
Soup Well, drop-in, thermostatic control mounted in stainless steel corded control panel, wet operation only, accommodates (1) 11 quart inset, over flange 12-13/16" diameter, cutout 12-1/4" diameter, outside 12-13/16" diameter, well outer 12" diameter, 3/4" drain, 120v/60/1-ph, 720 watts, 6.0 amps, cord with NEMA 5-15P, cULus, NSF, Made in USA
Vollrath 3646410 Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Vollrath |
| Capacity (qt) | 11 |
| Controls | Thermostatic |
| Diameter (in) | 12.81 |
| Height (in) | 11.69 |
| Hertz | 60 |
| Includes | 6' Cord |
| Installation Type | Drop In |
| Lid Type | None |
| NEMA | 5-15P |
| Number of Insets | 1 |
| Operation | Wet |
| Phase | 1 |
| Product | Soup Warmers |
| Product Type | Food Bars & Buffets |
| Special Features | Wet |
| Voltage | 120 |
| Warranty | 1-year Parts & Labor |
| Weight | 19.50 |
- 5
- 4
- 3
- 2
- 1
Review this product!
