Dinex DXIDPC20120 35 9/25" Heated Mobile Dish Dispenser w/ (2) Columns - Stainless, 208v/1ph

The Dinex DXIDPC20120 convection heated plate dispenser is recommended for super heating plates with the Dinex induction heating system. Its exterior is made of 18-gauge stainless steel, and the cabinet's inner wall is constructed of strong aluminum. The sides and top of the cabinet are insulated for optimal energy efficiency and heat retention.

This cabinet is mounted on four 3 1⁄2-inch Dinex Performa swivel casters with non-marking cushion treads. Two of the casters have brakes, so the unit can be both mobile and stationary. Sealed bearings on the casters reduce maintenance needs and increase maneuverability.

The self-leveling dispenser mechanism in the Dinex DXIDPC20120 heated plate dispenser is constructed of 304 stainless steel, and to prevent premature stretching, the springs in the dispenser are isolated. These springs can be adjusted in the field without tools and are specially tempered to minimize adjustments over time. Each silo accommodates plate sizes measuring 7 1⁄2 inches to 10 13⁄50 inches in diameter, though they are factory set for 9-inch china plates. The latchless, hinged lids are convenient, and the safety catch stops accidental lid closure.

Product Details

• Recommended for super heating plates with the Dinex induction heating system
• Factory set for Dinex 9-in. plate
• Can heat (150) 9-in. plates at once
• Plate size range: 7 1⁄2-10 1⁄4 in. dia.
• Self-leveling dispenser mechanism is constructed of 304 stainless steel
• Springs in the dispenser are isolated to prevent excessive heating and premature stretching
• Springs can be adjusted in the field without tools
• Springs are specially tempered and certified to minimize adjustments over time
• Latchless, hinged lids are convenient
• Open-lid catch stops accidental lid closure
• Exterior is made of 18-ga. stainless steel
• Cabinet inner wall is constructed of strong aluminum
• Cabinet sides and top are insulated for optimal heat retention and energy efficiency
• (4) 3 1⁄2-in. Performa swivel casters with non-marking treads
• 2 of the casters are equipped with brakes
• Sealed bearings on the casters require low maintenance
• Thermostatically controlled heating system uses forced air to heat each cabinet
• Programmable temperature settings
• Temperature range: 140-330 degrees F
• Factory preset for 210 degrees F for first 90 minutes, then drops to 180 degrees F

Utilities & Dimensions

• 35 9⁄25 in. L x 23 17⁄25 in. W x 42 24⁄25 in. H
• 15.4 A, 3200 W
• 208 V/60 Hz/1 ph, 10-ft. cord with a NEMA 6-20P plug