Beverage-Air DD68HC-S 69" Kegerator Beer Dispenser w/ (3) Keg Capacity - (2) Column, Stainless, 115v
$5,713.27 /Each
Call for details!
Selected Color: Stainless Steel
Selected Compressor Location: Left
| Left |
| Right |
Ship times may vary due to supply chain constraints. Please contact our Sales Team if you need this item in a specified time frame.
Beverage-Air DD68HC-S Description
The Beverage-Air DD68HC-S draft beer dispenser has two locking doors to secure valuable product. Preventing air loss to reduce energy consumption, magnetic gaskets snap into place on each door and ensure an airtight seal. Inside the cabinet, the reinforced floor supports the weight of three full-sized kegs.
The Beverage-Air DD68HC-S kegerator dispenser has stainless steel taps, cabinet, and top, with a galvanized steel interior to prevent corrosion. Keeping the stored drinks chilled to the desired serving temperature, users can operate the electronic control panel to moderate temperature settings. A built-in drainage tube in the front of the cabinet can be connected to a floor drain for quick disposal of waste. This unit features a comfortable, ADA-compliant working height.
- Temperature range: 36-38 degrees F
- Full electronic control
- Brushed stainless finish
- 21.98-cu.-ft. capacity
- ADA compliant
- Fits 3 full kegs
- 3 stainless steel dispensing taps on 2 insulated columns
- 2 solid cabinet doors can be locked to prevent theft
- Naturally antimicrobial silver lines beverage tubing
- Durable stainless steel exterior and galvanized interior
- Door gaskets with magnets
- Self-closing doors
- Heavy-duty stainless steel drip tray
- Floor and door sill are reinforced
- Drain tube enables connection to floor drain
- Self-contained refrigeration unit is side mounted
- Automatic defrost
- Epoxy-coated evaporator coil resists moisture
- R290 hydrocarbon refrigerant
- Heat transfer capacity: 2,392 BTU
- Interior: 53 in. W x 23 1⁄2 in. D x 30 1⁄2 in. H
- Overall: 68 in. W x 30 3⁄8 in. D x 49 5⁄16 in. H
- 5.5 A, 1⁄3 HP
- 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug
*Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.
*Image may not depict product color, inclusions or accessories.
*Free shipping on Beverage-Air DD68HC-S within the 48 contiguous states.
From The Manufacturer
Draft Beer Cooler, 68"W x 30-3/8"D x 49-5/16"H, 21.984 cu. ft., (2) doors, (3) keg capacity, door locks, (1) single & (1) dual faucet towers, stainless steel top & front, galvanized interior with reinforced stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, 3. amps, NEMA 5-15P, 115v/60/1-ph, cULus, UL EPH Classified, UL-Sanitation
Watch a video about this product
Beverage-Air DD68HC-S Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Beverage-Air |
| Also Known As | DD68HC-1-S |
| Base | Feet |
| Color | Silver |
| Compressor Location | Left |
| Cubic Feet | 21.98 |
| Depth (in) | 30.38 |
| Height (in) | 49.31 |
| Hertz | 60 |
| Keg Capacity | 3 |
| Keg Type | Full Size |
| NEMA | 5-15P |
| Number of Columns | 2 |
| Number of Taps | 3 |
| Phase | 1 |
| Product | Draft Beer Dispensers |
| Product Type | Commercial Refrigeration |
| Rating | Good |
| Temperature | One Zone |
| Voltage | 115 |
| Warranty | 7-year Limited Parts & Labor; 7-year Compressor Parts |
| Width (in) | 68 |
| Weight | 385.00 |
WARNING: Important Prop 65 information for California residents.
- Beverage-Air DD681S
- 5
- 4
- 3
- 2
- 1
Review this product!
Product Alert