Jackson TEMPSTAR VENTLESS (VER) High Temp Door Type Dishwasher w/ Built-In Booster, 208v/1ph

Because this Jackson TEMPSTAR VENTLESS (VER) TempStar® high-temp door-type dishmachine is ventless, it uses an energy-recovery system that uses water vapor to heat incoming water, eliminating the need for a hood. This system includes a built-in booster heater that raises incoming water 70 degrees Fahrenheit to ensure it reaches 150 degrees Fahrenheit for wash cycles, and its Sani-Sure™ feature reinforces a 180-degree-Fahrenheit final-rinse temperature for proper sanitization. To ensure dishes are washed and rinsed thoroughly, staff can use the multi-setting timer to initiate an extra-heavy, heavy, medium, or normal cycles. In a normal 87-second cycle, this unit cleans 41 racks in an hour with 36.9 gallons of water.

The Jackson TEMPSTAR VENTLESS (VER) door-type warewasher operates automatically with a pressure monitor for efficient water pressure regulation. While stainless steel nozzles maximize cleaning action, its stainless steel pump self-drains wash water each cycle. Its high-limit thermostat and low-water protection help minimize damage during cycles, and users can use a designated switch to start a delime cycle when hard water deposits accumulate.

A universal-style unit, this dishmachine can be field converted from a straight-through unit to a corner one and vice versa with a field conversion kit (sold separately). Because it doesn't require a hood and only requires a single-point connection for all utilities, installation is user friendly. This 32-inch-wide by 30⁷⁄₈-inch-deep by 82-inch-high unit boasts a 17¹⁄₄-inch vertical clearance, a rust- and corrosion-resistant stainless steel construction, and adjustable feet that can be raised 1¹⁄₈ inches on irregular flooring.

Product Details

• High-temperature sanitization
• Built-in booster heater raises incoming water 70 degrees F
• Sani-Sure final-rinse feature ensures 180-degree-F water at final rinse
• Energy-recovery mechanism with internal condensing system
• Washes 41 racks per hour (39 racks with suggested NSF load time)
• Uses 0.89 gal. of water per rack (36.49 gal. of water per hour)
• 8-gal. wash tank
• 3-gal. booster tank
• Electromechanical controls
• Multi-cycle timer provides extra-heavy, heavy, medium, and normal cycle settings
• High-limit thermostat and low-water protection
• Stainless steel nozzles
• Self-draining stainless steel pump
• Automatic tank fill and start
• Door interlock mechanism
• Delime cycle
• Manual-wash switch
• 1-HP wash pump motor
• Detergent-/rinse-additive signal connection fuse box
• Pressure regulator included (requires separate installation)

Construction

• Ventless
• 17¹⁄₄-in.-tall chamber
• Stainless steel construction
• Feet adjustable by 1¹⁄₈ in.
• Single-point connection for all utilities
• Field convertible from straight-through to corner unit with kit (sold separately)

Water & Installation Requirements

• Inlet water temperature: 40-90 degrees F
• Flow pressure connection: 40 PSI
• Minimum clearance above heat exchanger: 6 in.

Dimensions & Utilities

• 32 in. W x 30⁷⁄₈ in. D x 82 in. H
• 75.2 A, 14.6 kW, 1 HP
• 208 V/60 Hz/1 ph
• Minimum drainline size: 1¹⁄₂-in. IPS
• Minimum waterline size: ³⁄₄-in. MIP

Product Features

From The Manufacturer

TempStar® Dishwasher, door type, high temperature, with ventless & energy recovery, electric tank heat with built-in 70° F booster, approximately (39) racks/hour (0.89 gallons per rack), universal (straight-thru/corner) type, stainless steel exterior, electro mechanical controls, pressure regulator provided (for installation by others), Sani-Sure™, door interlock, dishtable not included, cETLus, ETL-Sanitation, ENERGY STAR® (Requires Assembly)

*Image may not depict product color, inclusions or accessories.

1-year Limited Parts & Labor

Jackson TEMPSTAR VENTLESS (VER) Specifications

Documents

Spec Sheet

Warranty

Use & Care Guide

Service Manual

Manual

Installation Guide

Brochure

Catalog

Certifications