This Hatco Imperial Electric Booster Water Heater combines quality construction and rugged dependability to provide up to 573 GPH (2169 LPH) of sanitizing rinse water. With a storage capacity of 16 gallons (60 liters), you are sure to have more than enough capacity to handle all of your dish loads. Each Hatco booster has a built-in heat trap and fiberglass insulation to minimize heat loss and also comes factory pre-plumbed and pre-wired with a calibrated immersion thermostat and high-temperature limit switch. But what makes this Imperial Electric Booster Water Heater such a wonderful dishwasher add-on is the fact that your dishware are guaranteed to not only be clean but sanitized and 'germ-free' for your customers (and your own) peace of mind.
- Imperial Booster Heater
- 16-gallon storage capacity
- Stainless steel front
- Custom fittings and Castone® tank
- 57 kw
Imperial Booster Heater, electric, 16-gallon storage capacity, 57KW, stainless steel front, custom fittings & Castone tank. 480V, 57 kw, 3ph. NOTE: Water supply in excess of 3.0 grains of hardness per gallon (GPG) must be treated and softened before being used; water containing over 3.0 GPG will decrease the efficiency and reduce the operating life of the unit. Please be advised that product failure caused by liming or sediment buildup is covered under warranty ONLY with proper usage of Hatco water treatment system.
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Hatco S-574803 SpecificationsPDF Spec Sheet
|40F Recovery||573 gph|
|70F Recovery||326 gph|
|Category||Water Booster Heaters|