Advance Tabco TGLG-3010 120" 14 ga Work Table w/ 304 Series Stainless Flat Top

Square side edges permit the Advance Tabco TGLG-3010 work table to sit flush against adjacent units, promoting a continuous work surface in long prep lines. Its front and back edges are shaped with 1 5⁄8-inch sanitary rolled rims to contain spills, and the flat top is made of 14-gauge 304-series stainless steel for strength and corrosion resistance. The surface is sound deadened to reduce noise and polished to a satin finish for a smooth, easily cleaned workspace.

The Advance Tabco TGLG-3010 work table is supported by a tubular galvanized steel frame, with 1 5⁄8-inch diameter legs, 1 5⁄8-inch rear cross rails, and 1 1⁄4-inch side cross rails. It includes three hat channels beneath the top, roll formed and embossed, then attached using structural adhesive and weld studs for maximum rigidity. TIG-welded seams are polished to match nearby surfaces, and gussets are welded in place to fortify the frame. One-inch adjustable plastic bullet feet and welded angle adapters round out the table’s structural elements.

Product Details

• TGLG Series
• Open base
• 14-ga. 304-series stainless steel top
• Satin finish
• Top is sound deadened
• Top includes 3 hat channels
• Fastened with structural adhesive and weld studs
• No backsplash
• 1 5⁄8-in. sanitary rolled rim front and back
• Square side edges
• 1 5⁄8-in. dia. tubular galvanized legs
• 1 5⁄8-in. dia. tubular rear cross rail
• 1 1⁄4-in. dia. tubular side cross rail
• Galvanized steel gussets
• Pre-engineered welded angle adapters
• 1-in. adjustable plastic bullet feet
• Overall dimensions: 120 in. L x 30 in. W x 35 1⁄2 in. H