In order to optimize space, the Advance Tabco DTC-3-1620-84R dish table has three deep drawn sink compartments for washing, rinsing, and sanitizing dirty dishes. These sinks have 3-inch radius corners and are located 12 inches away from the dishmachine when installed. Since the table is all TIG welded, it has a polished, sleek finish and is a high quality product because of the slow welding process. The areas that have been welded on the DTC-3-1620-84R dish table have also been blended to a satin finish in order to match the adjoining surfaces. Legs, cross bracing, channels, and bullet feet are made of stainless steel.
- 1 1⁄2 IPS waste drains
- Faucet holes punched on 8-in. centers in splash (faucets NOT included)
- Sinks are located 12-in. from machine when installed
- 3 compartment, deep drawn, 3-in. large liberal radius, seamless sinks
- Tile edge for easy installation
- All TIG welded for uniformity and durability
- 16 gauge stainless steel
- Stainless steel legs, cross bracing, and bullet feet
- Gussets are welded to channels of stainless steel
- Welded areas blended to match adjoining surfaces and to satin finish
- Overall Dimensions: 83 in. L x 30 in. W x 44 1⁄2 in. H
Dishtable with 3-compartment, Sink, (3) 16" x 20" x 12" bowls, 16 gauge 304 series stainless steel top, stainless steel legs & f-b crossrails, stainless steel bullet feet, 15" right drainboard, bowls are located 12" from machine, NSF (must verify machine to make sure the control box does not interfere)
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Advance Tabco DTC-3-1620-84R SpecificationsPDF Spec Sheet
|Construction||Best - 14 ga SS Top, 16 ga. SS Legs|
|Direction||Right to Left|
|Special Features||3 Compartment Sink|