Valpro 73" Kegerator Beer Dispenser w/ (3) Keg Capacity - (2) Columns, Black, 115v (VPBD4-2)
$2,834.11 /Each
Add to cart or Login to see your price!
Valpro VPBD4-2 Description
To resist wear and corrosion, the Valpro VPBD4-2 draft beer system has a stainless steel top and black powder-matted steel base. Its 17 13⁄50-cubic-foot interior can house three kegs, and to streamline service, this unit has two beer towers with two faucets on each. Cold air flows through the columns to ensure beers stay cold without excess foam, while its inlaid drip tray catches drips and spills. So users can move the unit as needed, this system is mounted on 4-inch casters.
The cabinet of the Valpro VPBD4-2 beer dispenser is constructed of sturdy stainless steel to withstand dents and scratches when loading and removing kegs. The interior can be accessed through three swing doors, which self-close and seal against magnetic gaskets to minimize cold leaks. These doors can be locked with a key after hours to deter tampering and theft. LED lighting brightens the cabinet for enhanced visibility, while large fans evenly distribute cold air to ensure kegs stay chilled. Internal holding temperatures range from 33 to 41 degrees Fahrenheit and can be adjusted with electronic LED controls on the front. Polyurethane insulation effectively contains chill for reduced temperature fluctuation.
- 17.26-cu.-ft. interior space
- 3 half-barrel keg capacity
- (2) 3-in. diameter insulated beer towers with 2 faucets each
- Cold air channel reduces excess foam
- Drip tray catches spills
- Stainless steel top withstands scratches and resists corrosion
- Black, powder-matted steel exterior
- Durable stainless steel interior
- LED interior lighting increases visibility
- 3 self-closing swing doors
- Magnetic door gaskets
- Key locks secure cabinet
- Temperature holding range: 33-41 degrees F
- Electronic temperature controls and LED display
- Large fans facilitate air circulation
- Polyurethane insulation maintains cool interior
- 4-in. casters
- Side-mount evaporator and condensing unit
- R-290 hydrocarbon refrigerant and capillary tube system
- 73 1⁄10 in. W x 24 2⁄5 in. D x 36 1⁄5 in. H
- 3 A, 1⁄2 HP
- 115 V/60 Hz/1 ph, 8 1⁄5-ft. cord with NEMA 5-15P plug
*Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.
*Image may not depict product color, inclusions or accessories.
*Free shipping on Valpro VPBD4-2 within the 48 contiguous states.
From The Manufacturer
Direct Draw Beer Dispenser, three-section, 17.26 cu. ft. capacity, stainless steel top, (2) refrigerated towers & (2) taps on each, electronic thermostat, digital LED temperature display, LED lighting, (3) self-closing doors, stainless steel interior with stainless steel floor, exterior black powder coated steel, side mounted self-contained refrigeration, casters NEMA 5-15P, 1/2 HP, 115v/60/1-ph, 3.0 amps, ETL, ETL-Sanitation
Valpro VPBD4-2 Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Valpro |
| Base | Casters |
| Color | Black |
| Compressor Location | Left |
| Depth (in) | 24.4 |
| Hertz | 60 |
| Keg Capacity | 3 |
| Number of Columns | 2 |
| Number of Taps | 4 |
| Phase | 1 |
| Product | Draft Beer Dispensers |
| Product Type | Commercial Refrigeration |
| Rating | Good |
| Special Features | Casters Included - Installed |
| Voltage | 115 |
| Warranty | 2-year Parts & Labor; 5-year Compressor Parts |
| Width (in) | 73 |
| Weight | 351.00 |
Important Prop 65 information for California residents.
- 5
- 4
- 3
- 2
- 1
Review this product!
