Beverage-Air DW64HC-S 65" Forced Air Bottle Cooler - Holds (190) 12 oz Bottles, 115v

The two lids on the Beverage Air DW64HC-S forced-air bottle cooler slide open to reveal 18.5 cubic feet of interior space. With this volume of space, the cabinet holds 25 cases of bottles or 34 cases of cans. Dividers in the cabinet separate different flavors or beverages to ensure quick retrieval and they're made of wire so air flows throughout evenly. To resist corrosion, these adjustable dividers are epoxy coated for protection.

The Beverage Air DW64HC-S bottle cooler uses environmentally friendly R290 hydrocarbon refrigerant in its self-contained refrigeration system. To ensure product is cooled efficiently and quickly, it implements forced air and powerful fans. A bottle cap opener on the unit's side enables employees to pop the top off a beverage as a cap catcher snares the lids to prevent messes on the floor.

Product Details

• 18.5-cu.-ft. interior space
• Temperature holding range: 36-40 degrees F
• Self-contained refrigeration system used forced air and fans
• R290 hydrocarbon refrigerant is safe for the environment
• 2 sliding lids
• Glass stops are integral and prevent lids from sliding too far
• 4 adjustable, epoxy-coated, wire dividers
• Accommodates 25¹⁄₄ cases of bottles or 34³⁄₄ cases of cans
• Deep well layout
• Service is streamlined by the bottle opener and cap catcher
• Top and exterior are made of stainless steel; interior is galvanized
• 1,702-BTU heat transfer capacity

Product Features

Dimensions & Utilities

• Interior: 61 in. W x 22³⁄₄ in. D x 26³⁄₄ in. H
• Overall: 65 in. W x 26¹⁄₂ in. D x 33³⁄₄ in. H
• 2.5 A, ¹⁄₄ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

From The Manufacturer

Bottle Cooler, flat top, 65"W, 26-1/2"D, 18.5 cu. ft., (2) sliding lids, (4) adjustable wire dividers, deep well design, bottle cap opener & cap catcher, galvanized interior with stainless steel floor, stainless steel top & exterior, self-contained refrigeration system, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA

*Image may not depict product color, inclusions or accessories.

Beverage-Air DW64HC-S Specifications

Spec Attribute	Spec Value
Manufacturer	Beverage-Air
Access	Top
Bottle Capacity	190
Color	Silver
Cubic Feet	18.5
Depth (in)	26.5
Door Type	Sliding
Height (in)	33.75
Hertz	60
Number of Dividers	4
Supports	Base
Temperature	36°F to 40°F
Type	Forced Air
Voltage	115
Warranty	7-year Limited Parts & Labor; 7-year Compressor Parts
Width (in)	65
Refrigerant	R290 (Hydrocarbon)
Phase	1
Rating	Better
Product	Bottle Coolers
Product Type	Commercial Refrigeration
NEMA	5-15P
Includes	Bottle Opener
Weight	334.00