Advance Tabco VKG-3010 120" 14 ga Work Table w/ Undershelf & 304 Series Stainless Top, 10" Backsplash

Constructed of 14-gauge 304-series stainless steel, the Advance Tabco VKG-3010 work table includes a sound-deadened, satin-polished top reinforced with three roll-formed embossed galvanized hat channels. These channels are secured to the underside using structural adhesive and weld studs, helping maintain a level work surface during repeated use. The top also features a square die-embossed, no-drip edge with a 1⁄2-inch return on three sides and a 10-inch backsplash with a 2-inch return to protect walls from splashes.

Fitted with an open base and an adjustable undershelf, the Advance Tabco VKG-3010 work table has a support frame made of galvanized steel. The undershelf is constructed of 18-gauge galvanized steel and attached using aluminum die-cast clamps that eliminate visible hardware. The legs are 1⁄5⁄8-inch tubular galvanized steel, and the unit is supported by galvanized gussets and tubular cross rails at the rear and sides. To permit leveling on uneven floors, the table is equipped with 1-inch adjustable plastic bullet feet and includes pre-engineered welded angle adapters to facilitate drawer installation in the future.

Product Details

• VKG Series
• Open base with undershelf
• Top made of 14-ga. 304-series stainless steel
• Entire top polished to satin finish
• Countertop edge polished to mirror finish
• Top is sound deadened
• Top includes 3 hat channels
• Hat channels fastened with structural adhesive and weld studs
• 10-in. backsplash with 2-in. return
• Countertop no-drip edge with 1⁄2-in. return on 3 sides
• Embossed square edge
• Adjustable undershelf made of 18-ga. galvanized steel
• Galvanized frame
• Aluminum die-cast “leg-to-shelf” clamps
• 1⁄5⁄8-in. tubular galvanized legs
• Rear and side tubular cross rail
• Galvanized steel gussets
• Pre-engineered welded angle adapters
• 1-in. adjustable plastic bullet feet
• Overall dimensions: 120 in. W x 30 in. D