Excellence Industries 70 3/4" Stand Alone Ice Cream Dipping Cabinet w/ 22 Tub Capacity - White, 115v (HBD-12HC)
Typically ships in 2 - 3 weeks
Retail Price: $6,800.00
$2,922.95 /Each
Excellence Industries HBD-12HC Description
The Excellence Industries HBD-12HC ice cream dipping cabinet uses a cold-wall evaporator system to efficiently cool ice cream with refrigerant lines running in the walls. These lines have R290 hydrocarbon refrigerant, which is more eco-friendly than traditional options. This unit holds displayed product at temperatures between -15 and 15 degrees Fahrenheit.
As many as (22) 3-gallon tubs fit in this Excellence Industries HBD-12HC ice cream dipping cabinet. It has a display section that holds 12 cans, and a storage area with space for 10 additional cans. Tub holders keep the cans in place, preventing them from sliding around while users are scooping. This cabinet has LED lighting to enhance the presentation of ice cream flavors through the single-layer glass lids. Ice cream cups, cones, and other merchandise can be placed on the shelf in the window.
- 20-cu.-ft. interior space
- Holds (22) 3-gal. tubs (12 in display section and 10 in storage section)
- Holders keep the tubs in place
- Bright, energy efficient LED lighting inside the cabinet
- 1-layer, heat-reflective lids ensure ice cream flavors are visible
- Painted steel interior resists scratches and corrosion
- Mezzanine window shelf holds cones, cups, and other merchandise
- 2 of the casters lock to keep cabinet in place
- Wide-range thermostat
- Temperature range: -15 to 15 degrees F
- Refrigerant lines are embedded in the walls with the cold-wall evaporator to properly cool ice cream
- Uses R290 hydrocarbon refrigerant
- 70 5⁄8 in. W x 27 3⁄8 in. D x 50 1⁄8 in. H
- 4.1 A, 5.5 kW, 1⁄2 HP
- 115 V/60 Hz/1 ph
*Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.
*Image may not depict product color, inclusions or accessories.
From The Manufacturer
Ice Cream Dipping Cabinet, horizontal, 20.0 cu ft, sliding glass lids, (12) 3-gallon cans displayed, (10) 3-gallon cans stored, wide range thermostat, LED interior lighting, cold wall evaporator, prepainted galvanized steel interior, single-layer heat-reflective glass lids, 40°F to -15°F temperature range, 70.75"L x 27.25"D x 51.75"H, 16.5 amps, 4.6 KWh/24hr, 1/2 HP, 115v/60/1ph
Watch a video about this product
Excellence Industries HBD-12HC Specifications
| Spec Attribute | Spec Value |
|---|---|
| Manufacturer | Excellence Industries |
| Application | Mobile |
| Capacity (3 gal cans) | 22 |
| Color | White |
| Containers | Tubs |
| Depth (in) | 27.38 |
| Design | Curved |
| Door Design | Sliding |
| Height (in) | 50.13 |
| Hertz | 60 |
| Phase | 1 |
| Product | Ice Cream Freezers |
| Product Type | Commercial Refrigeration |
| Rating | Good |
| Refrigerant | R290 (Hydrocarbon) |
| Refrigeration Type | Cold Wall |
| Series | HBD Series |
| Special Features | Cold Storage |
| Special Features | Lighted |
| Type | Dipping Cabinet |
| Voltage | 115 |
| Warranty | 1-year Parts & Labor; 5-year Compressor Parts |
| Width (in) | 70.63 |
| Weight | 378.00 |
- 5
- 4
- 3
- 2
- 1
Review this product!
Bought 2 and over a year old , no issues! Would buy another!
Have had 2 units in my ice cream store for over a year now and have not had to adjust anything, no complaints, Only issue is the the baskets that hold the tubs do stretch out and fall off the rails.
Do not buy if you make your own produt!
This is advertised as holding 22 3 gallon tubs, 12 on top and 10 on bottom. Per the manufacturer it only works with the cardboard tubs ie: Hershey's. If you make your own product and use the plastic "Ropak" type containers you can not use the baskets. This means you can not scoop with one hand, as you will need to hold the bucket steady with the other hand. If that was stated on the website I would have looked else ware. That was the first huge disappointment. The next is the thermostat was EXTREMELY difficult to dial in to the correct temperature. Need to make adjustments in tiny tiny steps and took almost 4 days to figure that out and get it right. Most likely due to the complete lack of documentation. And one more thing the glass sliding tops have some sort of glue strip with paper backing on the edges that needs to be peeled off before use. Did not realize this until little bits of the paper was accumulating along the edge and falling into the tum of ice cream. Again, some documentation could have prevented this. The only good thing I have to say is they have a good compressor warranty with 5 yrs. so we will have to see how long they last
Happy with product
Happy with the product , only two problems with it one small dint in front of chest the other is scratch on the top.
