Beverage Air SM58HC-S Milk Cooler w/ Top & Side Access - (1024) Half Pint Carton Capacity, 115v

Electronic controls on the Beverage Air SM58HC-S milk cooler lets users adjust the temperature from 36 to 38 degrees Fahrenheit, and an external thermometer enables monitoring. This unit operates with a cold-wall evaporator, and the evaporator's coil is epoxy coated to resist corrosion. To reduce the buildup of ice in the cabinet, it has an automatic defrost feature, and a centrally located drain will empty water left over from ice melting. Because this cooler operates with R290 hydrocarbon refrigerant, it's a more environmentally friendly unit than other options.

The Beverage Air SM58HC-S stainless steel milk cooler is made of durable and corrosion-resistant stainless steel. Its locking lids self-close and stay shut with a compression gasket, retaining cold air in the cabinet so the temperature doesn't drop. Mounted on 4-inch casters, this cooler can be relocated with minimal strain, and two of the casters have locks to keep it from rolling out of place. During transport, safety bumpers on the unit's lid protect it from damage if it collides into anything.

Product Details

• 22.63-cu.-ft. interior space
• 1 section
• Holds (16) 13-in. x 13-in. x 11-in. or (10) 19-in. x 13-in. x 11-in. flat-top milk carton cases
• Temperature holding range: 36-38 degrees F
• Temperature adjustable with electronic controls
• External thermometer lets users monitor the temperature
• Automatic defrost
• Floor drain in the center eliminates water
• Cold-wall evaporator with an epoxy-coated coil
• Uses R290 hydrocarbon refrigerant
• Self-latching lids with locks to secure contents
• Compression gaskets retain cool air
• Lids have safety bumpers to protect unit during transport
• Floor rack made of wire for uniform cooling
• Positioned on 4-in. plate casters
• 2 casters lock the unit in place
• Made of heavy-duty stainless steel
• 1,434-BTU heat transfer capacity

Product Features

Dimensions & Utilities

• Interior: 55 in. W x 27 in. D x 25³⁄₄ in. H
• Overall: 58 in. W x 30⁵⁄₈ in. D x 41¹⁄₈ in. H
• 2.2 A, ¹⁄₃ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

From The Manufacturer

School Milk Cooler, cold wall, normal temperature, 58"W x 30-5/8"D x 41-1/8"H, 22.63 cu. ft., single access, flat top carton capacities, (16) 13" x 13" x 11" or (10) 19" x 13" x 11" case capacity, self-latching doors/lids with safety bumpers, cylinder lock, wire floor racks, floor drain, electronic control, auto defrost, stainless steel interior & exterior, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

*Image may not depict product color, inclusions or accessories.

Beverage Air SM58HC-S Specifications

Spec Attribute	Spec Value
Manufacturer	Beverage Air
Access	Top & Side
Capacity (Half Pint Cartons)	1024
Color	Silver
Depth (in)	30.63
Height (in)	41.13
Hertz	60
Voltage	115
Warranty	7-year Limited Parts & Labor; 7-year Compressor Parts
Width (in)	58
Refrigerant	R290 (Hydrocarbon)
Phase	1
Product	Milk Coolers
Product Type	Commercial Refrigeration
NEMA	5-15P
Weight	379.00