T&S Pre-Rinse Faucet
From the company that invented this type of fixture, T&S pre-rinse faucets equip you to rinse dishes quickly in your compartment sink before they're placed in the dishwasher. T&S modular design standards support a full range of configurations, options, and accessories to meet your needs. More
T&S Brass Pre-rinse Faucets: What You Need to Know
T&S Brass and Bronze Works got its start in Long Island, New York, in 1947 after founder George Theisen invented the pre-rinse faucet. The company has since expanded to sell a variety of equipment worldwide, but still offers its flagship product. Users can adapt and customize T&S Brass pre-rinse faucets to serve myriad commercial rinsing needs – whether your dishroom requires an affordable Equip pre-rinse faucet to spray down a light to moderate volume of lightly soiled dishes daily, or a customized T&S scrapper to rinse food off soiled dishes in multiple sink compartments.
Common Questions About T&S Pre-rinse Faucets
What types of T&S pre-rinse units are available?
T&S pre-rinse sprayers are available in five basic design configurations. Users can customize their configuration by selecting from options for essential components and adding accessories.
- Overhead spring: This simple design uses a spring to hold the hose upright while users pull it down for use. It's easy to maintain and provides general pre-rinsing in single- or multiple-compartment sinks.
- Roto-Flex: This ergonomic design uses multiple elbow connections to achieve a vertical gliding motion. It isn't designed for use with multiple-compartment sinks.
- Overhead swivel: The horizontal arm at the top of this design gives you the range to spray into three-compartment sinks. Vertical motion is restricted to avoid abuse from swinging or yanking.
- Balancer: This design uses a retracting cable to support the hose from above with a riser. It gives more than 5 feet of reach in any direction.
- Low profile: This T&S pre-rinse unit uses a smaller version of the overhead spring for use in areas with confined space.
- Big flow: This design combines the overhead spring concept with large inlets and outlets. It enables full flow from an add-on faucet while still using the sprayer at its full capacity.
Where can I mount my T&S faucet?
Your installation can be adapted to suit various situations, adjusting for punch-out and plumbing location and mounting on a wall or counter.
What options and accessories are available?
T&S Brass offers customization by enabling users to choose between essential components and add-on accessories. For essential components, the following options are available:
- Cartridges: These watertight valves deliver hot or cold water to the faucet. Users have two choices: brass or ceramic cartridges. Ceramic cartridges withstand higher temperatures and are backed by a lifetime guarantee, but brass is more suited for use with water that contains sand or other gritty substances.
- Hoses: Most units come standard with a stainless steel outer hose and polyurethane inner hose. Customers can specify lengths for their hoses and choose from other materials, such as vinyl and PVC, based on preference.
- Inlets: Based on mounting needs, customers can choose from a standard inlet and several other options to connect their faucet to the existing plumbing.
- Spray valves: T&S offers various spray valves with different flow rates and stream configurations. Interchangeable quick-connect valves also are available, supporting multipurpose use.
The following accessories aren't essential for use but add functionality to T&S pre-rinse faucets:
- Vacuum breakers: These components prevent backflow of water into the supply system and are required by code in some locations.
- Add-on faucets: Users might choose to add a traditional faucet to the base of their pre-rinse unit to enable handwashing or easily fill sink compartments.
- Wall bracket: Support brackets that connect to the wall or countertop are available to add stability.
- Tees: Tee accessories are three-way connectors that supply water to chemical systems by splitting the water source.
- Add-on swivel: This accessory enables 360-degree rotation of the spray valve. Users will see an extended hose life while experiencing less strain on their wrists.
- Brush attachment: This spray valve attachment is ideal for operations that see high volumes of heavily soiled plates.
Can I use a T&S pre-rinse faucet outside foodservice?
Yes, T&S pre-rinse faucets can be used for any application that requires an overhanging spray valve, including in pet salons, supermarkets, and healthcare facilities.
Does T&S Brass offer an affordable pre-rinse option?
Operators concerned about price may consider purchasing from T&S's line of Equip pre-rinse faucets. These simple overhead spring units with built-in ceramic cartridges are suitable for basic rinsing but come with limited options and customization. Users can purchase add-on faucets, vacuum breakers, tees, and ergonomic swivels.