Duke 418-2436 36" 18 ga Work Table w/ Undershelf & 400 Series Stainless Flat Top

To prevent injuries from sharp edges, the Duke 418-2436 work table has a bull-nose front and rear, and its square sides enable it to be placed against walls and equipment. The top is constructed of durable 18-gauge, 400-series stainless steel, and two hat channels underneath the table provide support, ensuring the top remains level. For a quiet work area, a sound-deadening vinyl cushion runs between the hat channels and top's underside.

The Duke 418-2436 work table has a heavy-gauge undershelf that is modifiable by the user, and screws hold the shelf in place once the height is set, but if it is adjusted less than 6 inches from the floor, the table will no longer be NSF certified. Galvanized, tubular legs have sockets that are welded to the hat channels for additional strength, and adaptable bullet feet keep the table level on most uneven floors.

Product Details

• 400-series, 18-ga. stainless steel top
• Bull-nose front and rear are rounded to eliminate sharp corners
• Square sides can be placed flush against walls
• 2 hat channels are galvanized to provide strength
• Sound-deadening vinyl cushion between top's underside and hat channels
• Heavy-gauge galvanized undershelf is modifiable
• Set screws lock the shelf in place
• Not NSF certified if shelf is set less than 6 in. from the ground
• Galvanized, tubular legs with adjustable plastic bullet feet
• Leg sockets are galvanized and welded to hat channels
• Overall dimensions: 36 in. W x 24 in. D x 36 in. H