Pitco 40D Gas Fryer - (1) 45 lb Vat, Floor Model, Liquid Propane

This Pitco 40D gas fryer includes a rear-located 3⁄4-inch NPT connection valve for use with LP gas. With an oil capacity of 40 to 45 pounds, this fryer is capable of meeting medium-volume demands. Its deep cold zone—which contains about 20 percent of the fryer's oil—catches sediment so that it does not burn in hot oil. Operators can fry heavily breaded foods such chicken fingers, mozzarella sticks, and onion rings without worrying about sediment collecting and ruining the oil quality. Accommodating two tin-sized fry baskets, the frying area measures 14 inches by 14 inches with a 4-inch to 6-inch depth.

Mounted in the heat exchanger tubes, long-lasting alloy stainless steel heat baffles are designed to withstand high temperatures and provide maximum efficiency for heat and combustion. The gas control valve enables gas to flow to the main burner only once the pilot is established, and it cuts off the gas flow if the pilot flame goes out. If the fryer exceeds safe temperatures, the high-temperature limit will also shut off the gas flow.

This Pitco 40D gas fryer comes with 6-inch legs that provide the required amount of floor clearance and enable the area around the unit to be cleaned. A welded stainless steel tank with a super-smooth finish also facilitates cleaning. The front-located 1 1⁄2-inch drain valve and drain extension will help operators empty the tank's used oil into the appropriate container, and a clean-out rod helps remove sediment.