Turbo Air MST-28 27" Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

In early 2018, Turbo Air began replacing its models with new ones that are designed to be more efficient and use natural refrigerants. This model has been replaced by the MST-28-N. Here are details about that model:

M3 Series Sandwich/Salad Unit, 7 cu. ft., self-contained, (1) swing door, field reversible, (1) adjustable PE coated wire shelf, (8) 1/6 size pan capacity, cutting board side rail, cold air compartment, CFC free polyurethane insulation, stainless steel top, front & sides, stainless steel interior floor with AL sides & back, self-cleaning condenser device, cold bunker system, 4" casters, R290 Hydrocarbon refrigerant, 1⁄6 HP, 115v/60/1-ph, 3.8 amps, NEMA 5-15P, cETLus, ETL-Sanitation

When dust accumulates on the condenser in your refrigeration system, it increases the workload of the component and ultimately shortens its life. To save you time and money, and your condenser, the Turbo Air MST-28 M3 Series Sandwich/Salad prep table has a built-in self-cleaning condenser. Keeping dust away from the condenser coil fins, the self-cleaning condenser uses a mesh filter. A rotating brush brushes away dust that has collected on the mesh filter two to three times a day and moves up and down to remove the excess away from the condenser, effectively preventing dust from accumulating in the first place. The self-cleaning condenser prevents a premature system failure and maintains the highest efficiency of the refrigeration system.

The Turbo Air MST-28 M3 Series Sandwich/Salad prep table has an oversized, balanced, CFC-free R-134A refrigeration system that includes an evaporator and condenser for faster cooling and greater efficiency. Maintaining temperatures evenly, each pan can preserve fresh food longer, and the compartment separates the pans from the reach-in area to keep food from spilling. A thick cutting board with a convenient side rail is included to prep food on and keep it from falling off the counter. The cabinet is construction of stainless steel on the exterior, with galvanized steel back and bottom, and in the interior, with aluminum sides and back. The stainless steel guarantees the maximum amount of cleanliness and long product life.

Product Details

• M3 Series Sandwich/Salad food prep table
• Self-contained, oversized, balanced refrigeration system
• Equipped with the self-cleaning condenser that uses a mesh filter to prevent dust from reaching the condenser coil fins
• A rotating brush cleans the mesh filter 2-3 times a day and moves up and down to remove the excess dust outward and away from the condenser
• Refrigerator holds 33-39 degrees F for the best food preservation
• Cold air compartment maintains temperatures evenly for each pan to preserve fresh food longer
• Cold air compartment keeps food away from the reach-in area to prevent spills
• Stainless steel exterior with galvanized steel back and bottom
• Stainless steel interior floor with aluminum sides and back
• High-density, CFC-free polyurethane insulation
• 1 adjustable, heavy-duty, polyethylene-coated, wire shelf
• 1 swing, solid door with magnetic door gaskets
• 9 1⁄2-in.-deep, 1⁄2-in.-thick cutting board with side rail
• Insulated pan cover
• Field reversible hinge so you can choose which side the door opens on
• Includes 8 pans measuring 4-in.-deep, size 1⁄6
• 4 in. dia. x 5 in. H swivel casters with locks on the front set
• 1 hood
• Uses R-134A refrigerant
• 1⁄4 HP compressor motor
• 115 V/60 Hz/1 ph, 3.3 A, 9-ft. cord with NEMA 5-15P plug
• Shelf Dimensions: 22 1⁄2 in. W x 17 in. D
• Overall Dimensions: 27 1⁄2 in. W x 30 in. D x 37 in. H (D does not include 1 in. for rear spacers and H does not include 5 in. casters.)