Shop Canplas
- Canplas 3950A03 Grease Trap, 50 Gal/Min, 122 lb Capacity, 3 in Connection
- SKU: 065-3950A03
- Grease Trap, total weight 100lbs.,capacity weight 122lbs, flushes 3.2lps operating temps of 220*F
$601.62
- Canplas 3925A02 Endura Grease Interceptor, Light Weight, Durable, Quic...
- SKU: 065-3925A02
- Endura Grease Interceptor, Light Weight, easy to install, durable, quick release latches, removable baffles, Airtight Seal, In-Floor, Semi-recessed or on-floor, no leakage
$324.93
- Canplas 3920A02 Grease Trap, 20 Gal/Min, 40 lb Capacity, 2 in Connection
- SKU: 065-3920A02
- All Canplas Endura Grease Interceptors are tested and certified to standard PDIG101 of the Plumbing and Drainage Institute. Made of Engineered Thermoplastic, the Endura will not rust, peel or warp. Capable of supporting 440 lbs. across the lid , the Endura can be installed on the floor, semi-recessed or completely in the floor due to its unique reinforcing ribs. The O-ring sealing gasket is installed in a channel within the lid providing a positive, airtight seal reducing the chance of liquid solids, or odor escaping. Also has a 10 year manufacturer warranty. Has a flow rate of 20 gallons per minute, holds 40 lbs. of grease.
$301.35
- Canplas 3935AX6 35-50 GPM GI 6in Extension Riser Kit
- SKU: 065-3935AX6
- Kit that raises the height of the grease trap by 6 inches. This model fits 35 and 50 GPM models.
$289.80
- Canplas 3920PA15 Endura Plaster Trap w/ Removable Outlet Filter, 23.6...
- SKU: 065-3920PA15
- Endura Plaster Trap, Durable polypropylene construction, 440 lbs load rated cover, suitable for both in-floor and on-floor installations, Maximum continuous operating temperature of 220 F, Removable Outlet Filter, 10 GPM and 20 GPM Flow rate solutions, 23.6x17.5x16.3 inches
$286.18
- Canplas 3915A02C Endura Grease Interceptor, 15-GPM, 30-lb Capacity & 2...
- SKU: 065-3915A02C
- Endura grease interceptor, 15 US gallons per minute, 30 pound capacity, 220 Degree operating temperature capabilities, 440 lbs surface load capacity, 2 inch connection size, compromised of engineered thermoplastics, lid with air tight seal.
$244.71
- Canplas 393243A Endura InLine Drain Strainer, ABS Material
- SKU: 065-393243A
- Installed on individual sink wastes in kitchen and sanitary applications, the Endura Inline Drain Strainer prevents food debris, hair, lint, and similar solid material from entering the drainage system, causing restriction and blockage.
$61.18
- Canplas 394709A Full Grate, Light Weight, Durable, Corrosion & Chip Re...
- SKU: 065-394709A
- Full Grate PVC White, Light weight, durable, and corrosion resistant, PVC surface will not chip, rust, or corrode, 9x9
$16.30
- Canplas 392203W Flow Control Extension Kit For Extending Body Of Devic...
- SKU: 065-392203W
- Flow Control Extension Kit, used to extend the body of the Flow control device, when installed in-floor to finish floor level by means of an access sleeve, Available to suit all 3 models of flow control device, 3"
$14.10
- Canplas 3910A02 Endura Grease Interceptor, 10-GPM, 20-lb Capacity & 2-...
- SKU: 065-3910A02
- Endura grease interceptor, 10 US gallons per minute, 20 pound capacity, 220 Degree operating temperature capabilities, 440 lbs surface load capacity, 2 inch connection size, 16.3 H x 14.5 W x 17.5 in D, compromised of engineered thermoplastics, lid with air tight seal.
$214.36
- Canplas 393243AW Endura InLine Drain Strainer, PVC Material
- SKU: 065-393243AW
- Installed on individual sink wastes in kitchen and sanitary applications, the Endura Inline Drain Strainer prevents food debris, hair, lint, and similar solid material from entering the drainage system, causing restriction and blockage.
$61.18
- Canplas 3935A03 Grease Trap, 35 Gal/Min, 70 lb Capacity, 3 in Connection
- SKU: 065-3935A03
- All Canplas Endura Grease Interceptors are tested and certified to Standard PDIG101 of the Plumbing & Drainage Institute. Made of Engineered Thermoplastic, the Endura will not rust, peel or warp. Capable of supporting 440 lbs. across the lid, the E3ndura can be installed on the floor, semi-recessed or completely in the floor due to its unique reinforcing ribs. The O-Ring sealing gasket is installed in a channel within the lid providing a positive, airtight seal reducing the chance of liquids, solids or orders escaping. The Endura is backed by an extended 10 year warranty from the manufacturer. Includes is the award winning flow control with cleanout and air intake. This unit has a flow
$469.64
