The Kold-Draft GT564AHK ice maker has a 300 series stainless steel exterior finish that resists corrosion since it contains a large amount of nickel. When incoming water is 50 degrees Fahrenheit and ambient air is 70 degrees Fahrenheit, this unit can produce 514 pounds of half-cube ice. This type of ice provides great liquid displacement and is excellent for soft drinks, cocktails, and other beverages. To create ice, the Kold-Draft GT564AHK ice machine head has a horizontal evaporator that is placed upside down on its water plate. Each cube freezes individually from the outside in to prevent impurities from getting trapped. Air-cooled condensers use less water and energy than water-cooled condensers.
- Air-cooled condenser blows air over the refrigerant lines to cool them down
- 514-lb. daily ice production with 70-degree F ambient air and 50-degree F incoming water
- 405-lb. daily ice production with 90-degree F ambient air and 70-degree F incoming water
- Exterior is constructed of 300 series stainless steel
- Half-cube ice size: 1.25 in. x 1.25 in. x 0.625 in.
- Uses R404A refrigerant
- Horizontal evaporator individually freezes each cube since it sits over the water plate
- Can be stacked with KDB230 or KDB400 bins (sold separately)
- Can be serviced from the front
- Needs 8-in. right and back, 4-in. left, and 6-in. top clearance
- 6,500 average BTU; 8,750 peak BTU
- Incoming water pressure: 20-100 PSIG
- Incoming water temperature: 45-90 degrees F
- Ambient air temperature: 45-110 degrees F
- cETLus listed component
- Made in the U.S.
- 3⁄4-in. FPT potable water inlet
- 3⁄4-in. FPT bin drain
- 3⁄4-in. I.D. flex tubing cuber drain
- 3⁄8-in. FPT condenser inlet
- 1⁄2-in. FPT condenser outlet
Dimensions and Utilities
- 30.1 in. W x 25.7 in. D x 30.7 in. H
- 8 A, 6 kW
- 208-230 V/60 Hz/1 ph
In our ice makers guide, you can learn more about these units and their accessories.
Ice Maker, cube-style, air-cooled self-contained condenser, production capacity up to 514 lbs/24 hours at 70°/50° (405 lbs at 90°/70°), stainless steel exterior & frame, half-dice size ice, stackable, 208-230v/60/1-ph, 8.0 amps, cETLus, Made in USA
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Kold-Draft GT564AHK SpecificationsPDF Spec Sheet
|Ice Type||Half Cube|
|Warranty||3-yr parts & labor; 5-yr compressor & evaporator|
|Product Type||Ice Makers & Bins|
|Recommended Bins||KDB230, KDB400, HD201, HD204, HD207, HDX201, HDX204|
|Product||Ice Machine Head|
|24 Hr. Production (lbs)||514|
|Compressor Type||Air Cooled|
|Made in USA||Yes|
|Cold Water (in)||3/4|
|Indirect Waste Size (in)||3/4|
|Production Range (lbs/day)||100-999 lb|
|Width (in) Range||30 - 39|