Kold-Draft GB561AHK 42" Half Cube Ice Machine Head - 502 lb/24 hr, Air Cooled, 115v

Image may not depict product color, inclusions or accessories.

KaTom #: 657-GB561AHK • MPN: GB561AHK
Ships Free

Typically ships within 1 - 3 business days

(0 reviews)Write a Review
Retail Price: $6,112.00
$3,575.47 / Each

Image may not depict product color, inclusions or accessories.

Kold-Draft GB561AHK Description


Each day, the Kold-Draft GB561AHK ice machine head can produce 502 pounds of ice if incoming water is 50 degrees Fahrenheit and ambient air is 70 degrees Fahrenheit. The condenser is cooled with air that is moved over the coils by a fan. This design cools the refrigerant in the coils, so it can remove heat from the evaporator plate as water flows over it, freezing water to create ice cubes.

Half-cube ice forms in the Kold-Draft GB561AHK ice machine head; these cubes measure 0.625 inch by 1.25 inches by 1.25 inches and are perfect for drinks. The unit has a stainless steel frame and evaporator that resist rusting, denting, and bending. To increase ice production in the same footprint, the ice maker can be stacked with other units in the same series.

Ice Machine Details

  • 502-lb. daily ice production when ambient air is 70 degrees F and incoming water is 50 degrees F
  • 412-lb. daily ice production when ambient air is 90 degrees F and incoming water is 70 degrees F
  • Half-cube-cube ice size: 1.25 in. x 1.25 in. x 0.625 in.
  • Air-cooled condenser cools refrigerant by blowing cold air over coils, removing heat from the evaporator plate so water can freeze and produce cubes
  • Uses R404A refrigerant
  • Stainless steel frame and exterior resist corrosion and bending
  • Stackable with GB series ice machines
  • 6,500 average BTU; 8,750 peak BTU
  • Required ambient air temperature: 45-110 degrees F
  • Required incoming water temperature: 45-90 degrees F
  • Required water pressure: 20-100 PSIG
  • Requires 8-in. back and right-side clearances, 4-in. left-side clearance, and 6-in. top clearance
  • Ice bin sold separately
  • cETLus listed component
  • Made in the U.S.

Dimensions and Utilities

  • 42.3 in. W x 31.1 in. D x 17 in. H
  • 5.9 kW
  • 115 V/60 Hz/1 ph

Unsure if this ice machine head is right for your operation? Read more about them in our resource article on ice makers.

Ice Maker, cube-style, air-cooled self-contained condenser, production capacity up to 502 lbs/24 hours at 70°/50° (412 lbs at 90°/70°), stainless steel exterior & frame, half-dice size ice, stackable, 115v/60/1-ph, 13.0 amps, cETLus, Made in USA

*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.

Warning Small Important Prop 65 information for California residents.

Kold-Draft GB561AHK Specifications

PDF Spec Sheet
Manufacturer Kold-Draft
Ice Type Half Cube
Warranty 3-yr parts & labor; 5-yr compressor & evaporator
Voltage 115
Hertz 60
Phase 1
Product Type Ice Makers & Bins
Recommended Bins KDB650, KDB650D, KDB950, KDB950D
Depth (in) 31.1
Width (in) 42.3
Product Ice Machine Head
24 Hr. Production (lbs) 502
Height (in) 17
Compressor Type Air Cooled
Made in USA Yes
Cold Water (in) 3/4
Indirect Waste Size (in) 3/4
Amps 13
Production Range (per day) 100-999 lb
Width (in) Range 40-49
Weight 215.00
Kold-Draft GB561AHK Certifications
  • NSF
  • ETL
Recently Viewed Products