The True TBB-24-72G-SD-S-HC-LD three-section bar refrigerator holds 150 six-packs of 12-ounce cans on six shelves and a stainless steel floor. When these shelves are taken out, the cabinet can accommodate three half-barrel kegs, but the doors must be removed for them to fit. LED lights brighten the interior to enhance visibility, and glass enables customers or employees to see product without opening a door. Each door slides open with a 12-inch handle and self-closes to conveniently keep cold air around the product.
Temperatures in the cabinet are maintained at specific levels between 33 and 38 degrees Fahrenheit with R290 hydrocarbon refrigerant. Double-pane glass, polyurethane insulation, and door gaskets keep cold air inside the cabinet. The stainless steel countertop provides a place for mixing drinks and prepping garnishes. This True TBB-24-72G-SD-S-HC-LD three-section back bar cooler has a black exterior that fits into most themes.
- Can accommodate (105) 6-packs of 12-oz. cans or 3 half-barrel kegs (doors must be removed and reinstalled to fit kegs)
- LED lighting inside the cabinet enhances visibility
- Stainless steel floor supports heavy loads with a 1⁄2-in. reinforced lip
- Stainless steel countertop resists corrosion and scratches
- Black vinyl exterior is wear resistant
- Aluminum back matches rest of exterior
- 3 sliding glass doors open with 12-in. handles
- Self-closing door design
- Sliding doors need to be removed to place half-barrel kegs in the cabinet
- High-density polyurethane is foamed in place to insulate the cabinet
- NSF/ANSI Standard 7 compliant to hold packaged and bottled food product
- cULus and UL-EPH listed
- Made with innovation in the U.S.
Side-mount Refrigeration System
- Temperature holding range: 33-38 degrees F
- Uses R290 hydrocarbon refrigerant
- Evaporator and condenser fan motors operate efficiently while moving a consistent amount of air
- Epoxy-coated evaporator resists corrosion
- Slide-out condensing unit is accessible behind the front grille
Dimensions & Utilities
- Left and right shelves: 19 in. W x 161⁄4 in. D
- Center shelves: 195⁄8 in. W x 161⁄4 in. D
- Overall: 731⁄8 in. W x 251⁄2 in. D x 355⁄8 in. H
- 2.7 A, 1⁄4 HP
- 115 V/60 Hz/1 ph, 7-ft. cord with a NEMA 5-15P plug
Unsure if a back bar refrigerator is right for you? Take a look at our bar equipment buyers' guide for more information.
Back Bar Cooler, three-section, 24" deep, 35-5/8" high, (105) 6-packs or (3) 1/2 keg capacity, (6) wire shelves, condensing unit on left, stainless steel top, galvanized interior with stainless steel floor, stainless steel front & sides, aluminum back, (3) glass sliding doors, LED interior light, R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1, 2.7 amps, NEMA 5-15P, cULus, UL EPH Classified, MADE IN USA
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
True Refrigeration TBB-24-72G-SD-HC-LD SpecificationsPDF Spec Sheet
|Exterior Finish||Stainless Steel|
|Number of Levels||3|
|Special Features||LED Lighting|
|Special Features||Shallow Depth|
|Warranty||3 year parts & labor; 5 year compressor|
|Width (in) Range||70 - 79|
|Product||Back Bar Cooler|
|Product Type||Commercial Refrigeration|