The John Boos E3S8-1824-14T24 sink is for washing, rinsing, and sanitizing dishes with its three-compartment design. Each 14-inch-deep bowl has formed bottoms for quick drainage. Its top is constructed of 18-gauge stainless steel to withstand consistent use while resisting corrosion. Walls are protected from spills and splashing water by the 10-inch-high boxed backsplash that has a 1-inch tile edge to help with installation next to walls. Dirty dishes can be stored on one of the drainboards, while the other can be used as a surface for air drying clean dishes. Galvanized steel legs and base provide sturdy construction, and these legs have adjustable plastic bullet feet so the sink can be installed level on non-level floors. The John Boos E3S8-1824-14T24 three-compartment sink has a polished finish on the exposed welds for a smooth surface, while coved horizontal and vertical corners ease cleanup.
- 3 compartments offer separate spaces for washing, rinsing, and sanitizing
- Compartments have formed bottoms to assist draining
- Top is built of strong, corrosion-resistant stainless steel
- 24-in. left and right drainboards provide a place to set dirty dishes or air dry clean dishes
- Backsplash contains water and spills
- 1-in. faucet holes in the backsplash (faucet sold separately)
- 1-in. tile edge assists with installation against walls
- Welded areas are polished for a smooth, consistent surface
- Bullnosed outside corners protect from sharp edges
- Coved corners remove unsanitary food traps
- Satin finish provides a professional feel
- Heavy-duty legs and base are constructed of galvanized steel
- Plastic feet adjust to level on uneven ground
- Bowl dimensions: 18 in. L x 24 in. W x 14 in. D
- Overall dimensions: 102 in. L x 291⁄2 in. W x 433⁄4 in. H
- CSA-Sanitation listed; NSF certified
Want to know more about this unit or similar models? Our buyers' guide has more information on commercial sinks.
E-Series Compartment Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
John Boos E3S8-1824-14T24 SpecificationsPDF Spec Sheet
|Drainboard Location||Both Sides|
|Backsplash Height (in)||10"|
|Stainless Steel Gauge||18 gauge|
|Stainless Steel Grade||300 Series|
|Overall Length (in)||104|
|Sink Length (in)||18|
|Sink Width (in)||24|
|Sink Depth (in)||14|
|Product Type||Commercial Sinks|