The John Boos E3S8-18-14T18 three-compartment sink is constructed of durable, corrosion-resistant stainless steel with a galvanized steel base and legs. Three bowls mean it is ideal for washing, rinsing, and sanitizing dishes, and specially formed bottoms ensure proper draining. Dishes can be kept on the left and right drainboards directly before or after washing, while the backsplash minimizes messes by keeping water and spills away from walls. Coved corners assist cleaning, while the bullnosed outside corners eliminate sharp points on the exterior. All the exposed welds are polished until they blend with the rest or the surface. The John Boos E3S8-18-14T18 three-compartment sink has a 1-inch tile edge to facilitate installation next to walls and adjustable bullet feet enable level placement on uneven ground.
- 18-ga. stainless steel top is resistant to corrosion, dents, and scratches
- 10-in. backsplash keeps water away from the wall
- Backsplash has cavities to attach faucets (faucets sold separately)
- 3 sink bowls for washing, rinsing, and holding sanitizer solution
- Formed bottoms drain water
- 18-in. drainboards on either side for holding dishes directly before or after washing
- Durable galvanized steel base and legs are durable
- Adjustable feet for setup on uneven floors
- Tile edge for installation next to walls
- Coved corners facilitate cleaning
- Bullnosed outside corners for safety
- Exposed welds are ground to blend with adjacent surface
- Smooth satin finish
- Bowl dimensions: 18 in. L x 18 in. W x 14 in. D
- Overall dimensions: 90 in. L x 231⁄2 in. W x 433⁄4 in. H
- CSA-Sanitation listed; NSF certified
Read more about commercial sinks in our sink buyers' guide.
E-Series Compartment Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
John Boos E3S8-18-14T18 SpecificationsPDF Spec Sheet
|Drainboard Location||Both Sides|
|Backsplash Height (in)||10"|
|Stainless Steel Gauge||18 gauge|
|Stainless Steel Grade||300 Series|
|Overall Length (in)||90|
|Sink Length (in)||18|
|Sink Width (in)||18|
|Sink Depth (in)||14|
|Product Type||Commercial Sinks|