John Boos DT3B18244-2D24L 103" Dishtable w/ (3) 18x24x14" Bowls & (2) 24" Drainboards, L to R

The John Boos DT3B18244-2D24L dishtable provides separate bowls for soaking and pre-rinsing dishes before washing. Formed compartment bottoms enable water to quickly drain through the die-stamped, 3¹⁄₂-inch-diameter drain opening. Constructed of heavyweight, corrosion-resistant 16-gauge stainless steel, the unit has a smooth satin finish. Its coved corners eliminate crevices that could trap food, while sharp exterior corners are replaced by a safe bullnose design.

There are 18-inch drainboards on either side for placing soiled dishes, and its backsplash helps keep water and other spills from reaching behind the sink and 8-inch on-center faucet holes. Extra support and durability are provided by the stainless steel legs, which are installed directly under the bowls. The John Boos DT3B18244-2D24L dish table has a consistent exterior that comes from polishing the exposed welds to match the surrounding surfaces.

Product Details

• 3-compartment design for soaking and pre-rinsing dishes
• Bowls have formed bottoms to send water to the 3¹⁄₂-in. drain opening
• Tough 16-ga. stainless steel is corrosion resistant
• Corners are coved on a ³⁄₄-in. radius
• Bullnose corners protect employees from sharp points
• 8-in. on-center with 1¹⁄₈-in. faucet holes (faucet sold separately)
• 10-in.-H backsplash protects the surrounding area from spills and water
• Left and right drainboards hold dirty dishes before washing
• Stainless steel legs directly below the bowls reinforce the unit and offer extra strength
• Polished welds blend with adjacent surfaces
• Satin finish provides a smooth exterior
• Bowl dimensions: 18 in. L x 24 in. W x 14 in. D
• Overall dimensions: 103¹⁄₂ in. L x 30 in. W x 44¹⁄₁₆ in. H

From The Manufacturer

Dishtable/Pot Sinks, clean, straight design, 103-5/8"W x 30-3/8"D x 44-1/16"H overall size, (3) 18"W x 24" front-to-back x 14" deep compartments, (2) 24" drainboards, dish machine attachment on right side, 10"H boxed backsplash, (1) set of splash mount faucet holes with 8" centers, (3) rack slides with storage bracket, 16/300 stainless steel construction, stainless steel legs, bracing, & adjustable bullet feet, NSF, CSA-Sanitation

*Image may not depict product color, inclusions or accessories.

John Boos DT3B18244-2D24L Specifications

Spec Attribute	Spec Value
Manufacturer	John Boos
Backsplash Height (in)	10
Base	Open
Direction	Left to Right
Height (in)	44.06
Includes	Welded Bowl
Length (in)	30.38
Material	Stainless Steel
Product	Dish Tables
Product Type	Commercial Work Tables & Stations
Size	9 ft
Style	Straight
Type	Clean Dishtables
Warranty	1-year Against Defects in Material & Workmanship
Width (in)	103.63
Weight	246.00