The John Boos 3B20304-2D20 three-compartment sink is designed for washing, rinsing, and sanitizing dishes in separate bowls, while coved corners aid in cleaning. Dirty dishes can sit on one of the 20-inch drainboards, while clean dishes drain on the other board. It has a 10-inch-tall backsplash that keeps water from getting on other surfaces and has two 11⁄8-inch holes for faucet installation. The John Boos 3B20304-2D20 three-compartment sink is constructed of 16-gauge stainless steel for corrosion resistance, and the legs are installed directly under the bowls for support and durability. It has a smooth satin finish, and exposed welds are polished to create a smooth surface.
- 3-bowl design has compartments for washing, rinsing, and sanitizing
- 31⁄2-in.-dia. drain openings in each bowl
- Coved bowl corners ease the cleaning process
- Dirty dishes sit on one of the (2) 20-in. drainboards, while clean dishes drain on the other
- 10-in.-H backsplash contains water and other items to the unit
- 11⁄8-in.-dia. holes in the backsplash for faucet installation (faucet sold separately)
- 16-ga. stainless steel construction resists corrosion and simplifies cleaning
- Exterior has a smooth satin finish
- Bull-nose corners eliminate sharp edges
- Welded areas are polished for a smooth surface
- Legs are directly under the bowls to provide support
- Bowl dimensions: 20 in. L x 30 in. W x 14 in. D
- Overall dimensions: 103 in. L x 351⁄2 in. W x 43 in. H
- CSA-Sanitation listed; NSF certified
If you would like more information on commercial sinks, check out our sinks buyers' guide.
Sink, (3) 20"W x 30" front-to-back x 14" deep compartments, (2) 20" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
John Boos 3B20304-2D20 SpecificationsPDF Spec Sheet
|Drainboard Location||Both Sides|
|Backsplash Height (in)||10"|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||300 Series|
|Specialty Options||All Stainless Construction|
|Overall Length (in)||103|
|Sink Length (in)||20|
|Sink Width (in)||30|
|Sink Depth (in)||14|
|Product Type||Commercial Sinks|