The John Boos 3B18244-2D24 three-compartment sink is designed for washing, rinsing, and sanitizing dishes. Die-stamped bottom openings help water drain from the bowl, and there is a 24-inch drainboard on both sides of the unit to create a place to hold dirty dishes and drain clean dishes. Its 10-inch-tall backsplash prevents water from splashing onto other surfaces and has 11⁄8-inch-diameter holes where a faucet installs. Made of corrosion-resistant stainless steel, the sink has exposed welds polished down for consistency and coved corners for cleanup. Exterior corners have a bull-nose design to protect staff from contact with sharp edges. The legs provide the John Boos 3B18244-2D24 three-compartment sink with additional strength and support.
- 3 bowls offer separate compartments for washing, rinsing, and sanitizing
- Bowls have 31⁄2-in. dia. openings at the bottom for draining
- (2) 24-in. drainboards provide a place to hold dishes before or after washing, rinsing, and sanitizing
- 10-inch high backsplash keep water and debris off other surfaces
- 2 holes are punched in the backsplash for faucet installation (sold separately)
- Heavy-duty, 16-ga. stainless steel construction is corrosion resistant
- Satin finish facilitates cleaning and creates a professional appearance
- Polished welds match the rest of the surface
- Coved corners simplify cleanup by removing cracks where food gets stuck
- Bull-nose exterior corners eliminate sharp edges
- Legs are installed directly under the bowls for strength and stability
- Bowl dimensions: 18 in. L x 24 in. W x 14 in. D
- Overall dimensions: 105 in. L x 291⁄2 in. W x 43 in. H
- CSA-Sanitation listed; NSF certified
Additional information on commercial sink units can be found in our sinks buyers' guide.
Sink, (3) 18"W x 24" front to back x 14" deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
John Boos 3B18244-2D24 SpecificationsPDF Spec Sheet
|Drainboard Location||Both Sides|
|Backsplash Height (in)||10"|
|Stainless Steel Gauge||16 gauge|
|Stainless Steel Grade||300 Series|
|Specialty Options||All Stainless Construction|
|Overall Length (in)||105|
|Sink Length (in)||18|
|Sink Width (in)||24|
|Sink Depth (in)||14|