The Krowne 18-W66L cocktail station combines several essential pieces of back bar equipment: a dump sink, a blender station, a drainboard, and an ice bin. The blender shelf is equipped with a duplex outlet to power a blender and other nearby equipment. The ice bin is made of thick 20-gauge stainless steel that helps slow the melting of ice.
Each component of the 18-W66L cocktail station is built with durable stainless steel. A 22-gauge backsplash spans the rear length of the equipment to keep surrounding walls clean and dry. The front of the equipment is protected with a stainless and galvanized steel skirt. The entire unit is mounted on 15⁄8-inch galvanized steel legs, which are fitted with gray plastic bullet feet that can be adjusted to achieve a level installation.
- Dump sink occupies the right side of equipment with a 10 in x 14 in. x 6 in., 20-gauge stainless steel bowl and 11⁄2-in. center drain
- Blender shelf is made with 22-gauge steel and located on the left end of the equipment
- Duplex outlet is located under blender shelf to power a bar blender
- Center-located interior ice bin of 20 gauge stainless steel
- 22-gauge stainless steel backsplash protects surrounding walls and surfaces
- 20-gauge stainless steel drainboard
- 20-gauge galvanized steel back and bottom
- Rugged front apron of 22-gauge stainless steel over galvanized steel
- Mounted on 16-gauge galvanized steel tubular legs with plastic bullet feet
- Overall Dimensions: 66 in. L x 22.5 in. W x 33 in. H
- NSF Certified
Standard 1800 Series - Blender/Cocktail/Drain Board Station, 66" x 22 - 1/2" OA, 4" L, 24" W x 12" Deep, 80-lb. Ice Bin container w/Bottle Racks, 1" Drain, Blender Station/Left w/10" x 14" x 7" Sink - Faucet - 1 - 1/2" Drain, 24" DB/Right, Keyhole Stainless Speed Rail
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Krowne 18-W66L SpecificationsPDF Spec Sheet
|Category||Cocktail Units & Ice Bins|
|Chest Depth (in)||12|
|Total Width (in)||66|