Southbend HDG-24-M 24" Gas Griddle - Manual, 1" Steel Plate, NG

KaTom #: 348-HDG24MNG • MPN: HDG-24-M NG

Extended Lead Time (14+ days)

(0 reviews)Write a Review
$1,740.00 / Each

Southbend HDG-24-M Description

Southbend's HDG-24-M NG 24-inch commercial countertop natural gas griddle operates at 40,000 BTUs per hour to bring out the best in your grilled items in your busy kitchen. With reinforced and insulated double wall sides, this counterline manual model has a standard stainless steel front, vent and sides, with aluminized steel rear and bottom panels. Each foot of griddle is heated by a "U" shaped burner, which are equipped with runner tubes to keep the griddle lit in all conditions. A one-inch thick polished rolled steel plate keeps the products in tact on the griddle.

Product Details:

  • Operates at 40,000 BTUs per hour
  • Reinforced, insulated double wall sides keep heat inside
  • Standard stainless steel front, vent and sides
  • Aluminized steel rear and bottom panels
  • Every 12 in. of griddle heated by "U"-shaped burner
  • Burners equipped with runner tube to keep lit consistently
  • Fully-welded griddle plate with a protected exhaust vent helps prevent excess smoke from forming
  • Includes large capacity grease drawers to trap loose liquid and food debris
  • "No Cold" zone uniform heat distribution across the surface for consistent cooking
  • Battery-powered electronic spark ignition can quickly heat griddle
  • 1-in. thick polished rolled steel plate holds products
  • 5-in. high rear and 4-in. side splash guards protect users from sputtering liquid and loose particles
  • 3/4-in. rear gas connection and pressure regulator
  • 4-in. adjustable stainless steel legs for steadiness
  • Protected flue opening helps prevent debris accumulation
  • Overall Dimensions: 24-in. W x 33-3/4 in. D x 16-1/3 in. H
  • CSA-Design, CSA-Gas, cSAus Listed, NSF Certified

Griddle, countertop, NG gas, 24" W x 24" D cooking surface, 1" thick polished steel plate, manual controls, battery spark ignition, stainless steel front, sides & 4" adjustable legs, 60,000 BTU, CSA, NSF

*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.

Southbend HDG-24-M Specifications

PDF Spec Sheet
Manufacturer Southbend
Control Manual
Plate Material Steel
Heat Gas
Gas Type NG
BTU / Burner 30000
Overall Width (in) 24
Cooking Area Depth (in) 24
Plate Thickness (in) 1
Control Spacing (in) 12
Specialty Options Front Grease Trough
Warranty 1 year limited warranty
Overall Depth (in) 33.75
Weight 305.00
Southbend HDG-24-M Certifications
  • NSF