Vulcan-Hart's VCRG48TLP 48 inch commercial propane gas griddle has a 1-inch polished steel griddle plate with a stainless steel back, and includes tapered side splashes and a grease trough to protect users from potential kitchen messes. This VCRG-T Restaurant Series griddle operates at one 25,000 BTU per hour U-shaped aluminized steel burner for every 12 inches of width, along with infinite heat control. Its temperature can adjust from 200 to 450 degrees, and has an embedded mechanical snap action thermostat per burner for the maximum performance and response time. This commercial griddle has a 12-1/2 inch cooking height on four-inch adjustable legs to keep the griddle in place.
- 1-in. steel griddle plate and stainless steel back and grease trough protects users from messes
- 25,000-BTU U-shaped aluminized steel burner for every 12 in. of griddle width for even heat distribution and consistent grilling
- Temperature can adjust from 200 to 450 degrees F
- Embedded mechanical snap action thermostat per burner for the maximum performance and response time
- 12-1/2 in. cooking height on 4-inch adjustable legs keep griddle in place
- 3/4-in. rear gas connection and convertible gas pressure regulator made for LP service
- Includes stainless and aluminized steel chassis frame for better user protection
- LP conversion kit included
- Overall Dimensions: 48-in. W x 27-in. D x 16-in. H
- cSAus Listed, NSF Certified
Griddle, countertop, LP gas, 48" W x 20-1/2" D cooking surface, 1" thick polished steel griddle plate,(4) burners, fully welded, embedded mechanical snap action thermostat every 12", millivolt pilot safety, low profile, 4-1/2" grease can capacity, heavy gauge (1) drawer, stainless steel front, sides & front top ledge, 4" adjustable legs, 100,000 BTU, CSA, NSF
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Vulcan VCRG48TLP SpecificationsPDF Spec Sheet
|BTU / Burner||25000|
|Overall Width (in)||48|
|Cooking Area Depth (in)||20.5|
|Plate Thickness (in)||1|
|Control Spacing (in)||12|
|Specialty Options||Snap Action|
|Specialty Options||Front Grease Trough|
|Warranty||1 year limited warranty|
|Overall Depth (in)||27|