Continental SW48N12C-FB-D 48" Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The Continental Refrigeration SW48N12 sandwich prep unit has a large top with a 19-inch-deep cutting board. Small, medium, and large pizzas can slide over this board while covered in toppings. The cutout top can hold 12 different toppings in sixth-size pans and, during slow hours, the lid can cover the pans, protecting them from contamination. More ingredients can be stored in the drawers, which can slide open and are accessible. Each drawer seals shut with a magnetic gasket and retains cold air with polyurethane insulation. For durability, these drawers—along with the front, sides, and top—are all made of heavy-duty stainless steel.

With a self-contained condenser, this Continental Refrigeration SW48N12 prep table keeps ingredients chilled between 33 and 41 degrees Fahrenheit, which can be set by the operator to suit different applications. Its expansion valve system responds to temperature changes quickly, speeding up refrigerant flow to return the temperature to the set level. This level can be monitored on the front digital display and, if it leaves the safe zone, the unit will alarm to notify nearby staff of the problem. For user convenience, the refrigeration system breathes through the front, requiring zero clearance on the sides.

Product Details

• 13.4-cu.-ft. interior space
• Polyurethane insulation increases energy efficiency
• Stainless steel drawers with polished chrome handles
• Snap-in, magnetic gasket for each drawer
• Exterior is made of stainless steel with an aluminum back
• Interior is made of aluminum
• Removable cutout tub simplifies cleaning
• Cutout top holds 12 sixth-sized pans
• Insulated lid can be used to prevent contamination
• 19-in.-deep cutting board can accommodate large pizzas
• 3³⁄₄-in. casters
• 1,940 BTU of heat transfer capacity

Product Features

Rear-mounted Refrigeration System

• Expansion valve system is more efficient than capillary tubes systems
• Operates with R290 hydrocarbon refrigerant
• Electronic controller with a high/low temperature alarm
• External temperature display
• Temperature holding range: 33-41 degrees F
• Automatic, hot gas condensate evaporator
• Evaporator is plasticized to minimize corrosion buildup
• Front-breathing design needs zero clearance on each side

Dimensions & Utilities

• 48 in. W x 38¹⁄₄ in. D x 41 in. H
• 4.5 A, ¹⁄₄ HP
• 115 V/60 Hz/1 ph, 10-ft. cord with a NEMA 5-15P plug

*Free shipping on Continental SW48N12C-FB-D within the 48 contiguous states.

From The Manufacturer

Sandwich Unit, Front Breather, 48"W, 13.4 cu ft capacity, two-section, (12) 1/6 size x 4" deep pans with 19" cutting board, (4) drawers, accommodates (1) 12 x 18 x 6 pan per drawer or (1) 1/2 x 6 pan & (1) 1/3 x 6 pans per drawer capacity (supplied by others), stainless steel top, front & end panels, aluminum back & interior, 3-3/4" casters, rear mounted self-contained refrigeration, automatic hot gas condensate evaporator, R290 hydrocarbon refrigerant, 1/4 hp, cETLus, NSF

*Image may not depict product color, inclusions or accessories.

6-year Parts & Labor; 7-year Compressor Parts

Continental SW48N12C-FB-D Specifications

Documents

Spec Sheet

Warranty