Ice-O-Matic's ICE0250FA ice maker is paired with the B25PP bin to provide any restaurant, hotel, or school kitchen with a solution for keeping ice on hand for bulk cooling or beverage service needs. The ICE0250FA/B25PP combination will provide your kitchen with a 24-hour ice production of up to 336 pounds of full-cube ice and a total bin capacity of 242 pounds, all in a relatively slim width of 30 inches to accommodate smaller layouts. This is an air-cooled model that requires 6 inches of clearance for air exchanges, but eliminates air filter maintenance because it does not use one.
The Ice-O-Matic ICE0250FA/B25PP ice machine comes standard with many features that promote a reliable performance. The unit is constructed with stainless steel and polyethylene to resist corrosion, while the evaporator includes a copper core and nickel plating to stand up to long-term ice and water exposure. The ice maker is protected by an antimicrobial coating to discourage the growth of bacteria, and frozen ice is consistently harvested with a harvest assist feature that pushes it into the storage bin. The ice bin is insulated to preserve ice once it is deposited.
- Ice maker and storage bin combination
- Produces full-cube ice for beverages and bulk cooling
- Maximum 24-hr. ice production capacity of 336 lbs.
- Total storage capacity of up to 242 lbs.
- Air-cooled model requires a 6-in. clearance for air exchange
- Filter-free air eliminates the hassle of filter cleaning and maintenance
- Unit resists corrosion and unsightly smudging or fingerprints
- 115 V/60 Hz/1 ph, 13.3 A, 7.9 kWH per 100 lbs. of ice
- Ice Maker Dimensions: 30.13 in. W x 24.25 in. D x 20 in. H
- Ice Bin Dimensions: 30 in. W x 31 in. D x 28 in. H
- CE and cULus Listed; NSF Certified
Ice Maker Features
- Copper-core evaporator with nickel plating resists ice and water damage
- Antimicrobial protection is built in to ice-making surfaces to inhibit bacterial growth
- Consistent ice production is assisted by a harvest assist to push frozen ice into the bin
Ice Bin Features
- Polyethylene bin liner includes up to 3-in. insulation to preserve ice
- Built-in scoop holder and sliding lid provide no-hassle ice retrieval
- Adjustable 6-in. legs facilitate cleaning under the unit
ICE Series Modular Cube Ice Maker, air-cooled, approximately 336 lb production/24 hours, full-size cube, filter-free air, PURE ICE built in antimicrobial protection, Harvest assist produces Ice consistently/reduces operating cost, 115v/60/1-ph, 13.3 amps, UL, NSF, CE with Ice Bin, 242-lb storage capacity, top-hinged front-opening door, for top-mounted ice maker, polyethylene exterior and interior, molded plastic door
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Ice-O-Matic ICE0250FAB25PP SpecificationsPDF Spec Sheet
|Access Type||Lift Up Door|
|Compressor Type||Air Cooled|
|Ice Type||Full Cube|
|Specialty Options||Antimicrobial System|
|Warranty||3 years parts & labor/5 years evaporator & compressor|
|Capacity Range||80-279 lb|
|Production Range||200-549 lb|
|Width (in) Range||30 - 39 in|