The Beverage Air SPED72-30M-2 is an Elite series sandwich and salad prep table built with a durable stainless steel top, front, grille, drawers, and sides. The unit comes with removable hoods and insulated lid assemblies built with the same stainless steel. In this Elite series prep table, the airflow has been improved to extend the shelf life of food and keep it fresher for longer. Food pans are cooled from the bottom, eliminating the need for an air blanket.
This prep table comes equipped with an aluminum refrigerated interior to resist corrosion and offers plentiful storage, with its two cabinet doors and two drawers. The cabinet doors are attached to the unit with cartridge-style hinges that are self-closing, with a stay-open feature at 120 degrees. Each cabinet door is lined with a plug-in-type magnetic gasket for a positive seal. The two drawers are supported on telescoping drawer slides with locking features. The upper drawer can hold 4-inch-deep food pans, while the lower drawer can hold 6-inch-deep pans. Each drawer is lined with a snap-type magnetic vinyl gasket for a positive seal.
For the top section, the unit includes 18 sixth-size, 4-inch-deep polycarbonate food pans to hold ingredients for preparation. The Beverage Air SPED72-30M-2 sandwich and salad prep table includes a 10-inch-deep cutting board that is removable for easy cleaning.
- Stainless steel top, front, grille, sides, and drawers
- Galvanized steel on back and bottom of unit
- Pans are cooled from bottom to hold consistent, food-safe temperatures
- Aluminum interior to resist corrosion
- 2 cabinet doors and 2 drawers, all with vinyl magnetic gaskets
- Pan divider supports included
- CFC- and HCFC-free, foamed in-place polyurethane insulation, 2-inch minimum thickness
- (4) 6-inch casters, 2 locking
- 10-inch-deep removable cutting board
- 18 sixth-size food pans included for top section
- Unit holds 30 sixth-size pans total
- R-134a refrigerant
- Side / rear breathing
- Temperature holds between 33 and 40 degrees F
- 115 V/60 Hz/1 ph, 9.6 A, 1⁄3 HP
- Overall dimensions: 72 in. W x 365⁄8 in. D x 451⁄2 in. H
Elite Series™ Mega Top Refrigerated Counter, three-section, 72" W, 14.6 cu. ft., (2) drawers (upper & lower pull-out drawers accommodate 6" deep pans), (2) doors, stainless steel top with opening for (30) 1/6 size pans (pans furnished are 4" deep, tops will accommodate 6" deep pans), 10" polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Beverage Air SPED72-30M-2 SpecificationsPDF Spec Sheet
|Cutting Board Depth (in.)||10|
|Warranty||3 year parts & labor/5 year compressor|
|Width (in) Range||69 - 85 in|