Beverage-Air DD72HC-1-S 72" Kegerator Beer Dispenser w/ (3) Keg Capacity - (2) Column, Stainless, 115v

This Beverage Air DD72HC-1-S draft beer cooler is a good choice for locations needing to serve a high volume of cold, fresh beverages quickly. Supplied by durable antimicrobial tubing that resists flavor-altering bacteria, it has four stainless steel taps mounted on two stainless steel columns. Since the cabinet is made of stainless steel with a reinforced floor, it can withstand heavy use while resisting sagging, denting, or warping.

Providing hundreds of frosty cold beverages without needing a refill, the Beverage Air DD72HC-1-S beer dispensing system can store three kegs inside the cabinet. In between uses, operators can lock the solid doors to preventing content theft. To streamline installation, the compressor is included within the unit and doesn’t require any additional coolant lines or remote compressing to operate.

Product Details

• Temperature range: 36-38 degrees F
• Full electronic control
• Brushed stainless finish
• 19.95-cu.-ft. capacity
• Can fit 3 full kegs
• 4 stainless steel dispensing taps are mounted on 2 insulated columns
• 3 solid cabinet doors have locks
• Antimicrobial beverage tubes carry liquid from kegs to nozzles
• Stainless and galvanized steel construction enhance strength
• Magnetic door gaskets retain cold air
• Self-closing doors
• Heavy-duty stainless steel drip tray
• Floor and door sill are reinforced for extra strength
• Drain tube enables connection to floor drain
• Side-mounted, self-contained compressor
• Automatic defrost
• Evaporator coil coated with epoxy resists moisture damage
• R290 hydrocarbon refrigerant minimizes environmental impact
• Heat transfer capacity: 1,942 BTU

Dimensions & Utilities

• Interior: 60¹⁄₄ in. W x 18³⁄₄ in. D x 27⁷⁄₈ in. H
• Overall: 72 in. W x 24³⁄₄ in. D x 51¹⁄₄ in. H
• 3.1 A, ¹⁄₃ HP
• 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

*Free shipping on Beverage-Air DD72HC-1-S within the 48 contiguous states.

From The Manufacturer

Draft Beer Cooler, 72"W, 24-3/8"D, 19.95 cu. ft., (3) doors, (3) keg capacity, door locks, (2) dual angle faucet columns, stainless steel exterior, stainless steel top & drip tray, galvanized interior with reinforced stainless steel floor walls & ceiling with stainless steel floor, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

*Image may not depict product color, inclusions or accessories.

Beverage-Air DD72HC-1-S Specifications

Spec Attribute	Spec Value
Manufacturer	Beverage-Air
Base	Feet
Color	Silver
Compressor Location	Right
Cubic Feet	19.95
Depth (in)	24.38
Height (in)	51.25
Hertz	60
Keg Capacity	3
Keg Type	Full Size
NEMA	5-15P
Number of Columns	2
Number of Taps	4
Phase	1
Product	Draft Beer Dispensers
Product Type	Commercial Refrigeration
Rating	Good
Temperature	One Zone
Voltage	115
Warranty	7-year Limited Parts & Labor; 7-year Compressor Parts
Width (in)	72
Weight	392.00