The Turbo Air TSA-3-14-D1 three-compartment sink has three 18-inch-by-18-inch-by-14-inch bowls that have a swirl away design to easily drain. On the right and left side of the compartments, there are 18-inch drainboards, so dirty dishes can sit on one side while the clean ones can dry on the other side. Made of stainless steel, the unit resists corrosion and minor damage, and the one-piece design adds durability. The welded surfaces on the Turbo Air TSA-3-14-D1 three-compartment sink have been blended to match the adjacent surfaces. Since the nuts in the strainers are made of brass, they are corrosion and high temperature resistant.
- 18-in. die-stamped, creased drainboards on the right and left sides provide a place for dirty dishes to sit and clean dishes to dry
- Swirl away bowl design ideally drains water
- 18-ga. stainless steel construction is corrosion resistant and easy to clean
- Fused, shielded, and polished to create a durable, one-piece unit
- Welded areas are blended to match the adjacent surfaces
- Brass nuts in the strainers are corrosion resistant and withstand high temperatures
- Durability is added with the galvanized leg and gusset construction
- Bullet feet can be adjusted for use on uneven floors
- Accepts 1 faucet
- Bowl Dimensions: 18 in. L x 18 in. W x 14 in. D
- Overall Dimensions: 90 in. W x 24 in. D x 441⁄2 in. H
- NSF certified
Sink, Three Compartment, with 18" left & right-hand drainboards, 18" front-to-back x 18" wide sink compartments, 14" deep with 11" high splash, 18/304 stainless steel bowls, galvanized gussets & tubular legs with adjustable ABS feet, NSF approved
*The warranty will not be honored for residential or non-commercial use of any Commercial Equipment.
Important Prop 65 information for California residents.
Turbo Air TSA-3-14-D1 SpecificationsPDF Spec Sheet
|Drainboard Location||Both Sides|
|Stainless Steel Gauge||18 gauge|
|Stainless Steel Grade||304 Series|
|Overall Length (in)||90|
|Sink Length (Side to Side)||18|
|Sink Width (Front to Back)||18|