Dyson AB14 Airblade dB Automatic Hand Dryer - Wall Mount, White, 110-120v

Image may not depict product color, inclusions or accessories.

KaTom #: 082-AB14WH • MPN: AB14 301854-01 120V

Ships Free

This item is no longer available

(0 reviews)Write a Review

This product is discontinued.

To see similar options, click here

Product Discontinued

Image may not depict product color, inclusions or accessories.

Dyson AB14 Description


With a 50 percent drop in perceptible noise from the original Airblade™ hand dryer, the Dyson Airblade dB is the replacement for the AB04 and AB06. To reduce the noise produced by the Dyson AB14 hand dryer, the aperture's angle has been shifted to cross at a lower point in the drying cavity and the motor's noise level has been reduced. The white polycarbonate ABS construction is durably built to resist damage from typical wear and tear and is resistant to damage from vandalism. This hand dryer uses a sheet of air traveling at 420 MPH to dry hands in just 12 seconds.

Product Details

  • Replaces AB02, AB04, and AB06
  • Noise has been reduced by 50% from the original Airblade
  • Aperture shape and angle have been changed to reduce noise
  • Airblade technology dries hands in 12-sec. by using a sheet of air traveling at 420 MPH
  • HEPA filters remove 99.97% of bacteria from the air
  • Digital V4 motor from Dyson draws in 9.25-gal. of air a sec. and spins at 92,000 times a min.
  • Water ingress is rated to IP35 to keep the internal components safe from damage from high velocity water
  • Galvanized steel back plate/mounting bracket
  • White polycarbonate ABS construction is resistant to damage and vandalism
  • 120 - 127V/50 -60 Hz/1-ph, 1400W
  • Overall Dimensions: 11-7/8 in. W x 9-3/4 in. D x 26-in. H
  • HACCP International and NSF Certified
  • Note: minimum installation requires 7-7/8 in. from the floor and 2-in. from both sides and above

Faster Drying, Quieter Design

  • The Airblade works by using a sheet of air to scrape water off of hands with each pass through the air stream to dry faster than most other hand dryers
  • Dyson's digital motor V4 pulls in 9.25-gal. of air a sec. to produce the force needed for the 12-sec. dry time
  • The motor only has 3 moving parts to help reduce breakdowns
  • Airblade AB14 has improved their apertures by redesigning their shape and has improved the motor for a 50% reduction in noise from the original Dyson Airblade

Hygienic Design

  • The Airblade AB14 is approved by HACCP International for safe use in the food and beverage industry
  • HEPA filter removes 99.97% of bacteria in the air used for drying
  • Touch-free design for sanitary operation
  • Antimicrobial coating is infused in the casing to slow down microbial development

Lower Costs and Positive Environmental Impact

  • The Airblade produces 72% less CO2 than some other hand dryers and 68% less than paper towels
  • Operating costs of the Airblade can be up to 69% less than other hand dryers and 97% less than paper towels
  • Standby power consumption is less than 0.5W

The Dyson Airblade dB hand dryer wipes hands dry with a high-velocity sheet of air in just 12 seconds. Airblade technology results in air traveling 420 mph with a 1400W motor. The HEPA filter removes 99.97% of bacteria from the air used to dry hands. Touch-free operation. NSF & HACCP approved. Polycarbonte ABS casing with homogeneous anti-microbial additive. White.

Dyson AB14 Specifications

Manufacturer Dyson
Also Known As AB04, AB02, AB06
Amps 12 Amps
Category Hand Dryers
Color White
Controls Automatic
Cover Metallic
Drying Cycle 12 Seconds
For Use With Hand Drying
Go Green Eco Friendly
Mounting Location Wall
Specialty Options HEPA Filter
Type AB14 / db
Warranty 5 Year Parts, 1 Year Labor
Watts 1400W
Warranty 5-year Parts, 1-year Labor
Hertz 60
Voltage 110/120
Phase 1
Weight 28.70
Recently Viewed Products